Results 1 to 10 of 10

Thread: CR Girls und Panzer assembly support pls

  1. #1
    Blind Shooter 1manshow's Avatar
    Join Date
    Jul 2008
    Location
    Henau
    Posts
    32
    Thanks
    36
    Thanks Received
    42

    Default CR Girls und Panzer assembly support pls

    Hi

    a couple of years ago I bought a Lupin Pachinko followed by a StarWars. Now the Pachinko Bug got me again when I saw the Girls and Panzer machine. Since I am a big fan of the series but also highly into the online game World of Tanks Blitz this was a must buy for me.

    I tried communicating with japanese vendor mekapit but with no success. So i contacted Juno from bidservice who was very helpful. Yesterday the machine arrived.

    in the next days I will try to put the right things to the right place as he had to send in 2 parcels due to weight limitation.

    There is a manual included but all in Japanese so I might need the help from you experts maybe.

    First question that I hope you can answer is: there is a plug asking for 24v. I bought a transformer but is it important to check for positive/negative pole? Can i break something if i use trial and error?

    kind regards

  2. #2
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: CR Girls und Panzer assembly support pls

    Ac transformers. Don't have a positive and negative poles. Your normally ok if the contacts are reveresed on an AC
    Just make sure its a high amp transformer. Probably rated at 250va
    Ian #UKPachinko

  3. The following 2 users say "Thanks" to Drunkenclam


  4. #3
    Blind Shooter 1manshow's Avatar
    Join Date
    Jul 2008
    Location
    Henau
    Posts
    32
    Thanks
    36
    Thanks Received
    42

    Default Re: CR Girls und Panzer assembly support pls

    Thanks for feedback. Hope did get that right. Transformer input, doesnt matter since dc. Output 24 to pachinko machine doesnt matter either?
    As well hope it is ok with 150va. I just bought the same I used for my starwars pachinko.
    sorry for maybe all this dumb questions. Me and electricity never get friends....

  5. #4
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: CR Girls und Panzer assembly support pls

    Well our US friends don't seem to have an issue running underrated transformers on some machines. How ever in the UK it seems more critical. I normally use the rating one up from the machine spec. If you use an underrated one. It may be ok to start with but will get hot and the voltage output will drop causing the machine to develop strange faults. Animatronic to stop and the screen to go blank. Also risking short circuit or fire as the enamel coating on the transformer begins to fail due to the heat.

    So I would never ever recommend using a transformer below spec.
    Ian #UKPachinko

  6. The following 2 users say "Thanks" to Drunkenclam


  7. #5
    Pachi Puro KimbaWLion's Avatar
    Join Date
    Jan 2010
    Location
    JUST outside Philadephia Pennsylvania
    Posts
    2,651
    Thanks
    5,026
    Thanks Received
    2,457

    Default Re: CR Girls und Panzer assembly support pls

    Since you mentions Girls Und Panzer it gives me the excuse to paste the following:
    I do hope everything works out for you though!
    I may not be the best guy, BUT I am not the bad guy!- Coop from Megas XLR

  8. The following 5 users say "Thanks" to KimbaWLion


  9. #6
    Blind Shooter 1manshow's Avatar
    Join Date
    Jul 2008
    Location
    Henau
    Posts
    32
    Thanks
    36
    Thanks Received
    42

    Default Re: CR Girls und Panzer assembly support pls

    So far looks good. Thanks for the support. Good for me that all the individual parts use different colors and different sizes for the connectors... Now it looks like everything is at the place it belongs. Next step is the trafo.

  10. The following user says "Thanks" to 1manshow


  11. #7
    Sandwich Shooter stampeed valkyrie's Avatar
    Join Date
    Feb 2015
    Location
    PA
    Posts
    450
    Thanks
    114
    Thanks Received
    598

    Default Re: CR Girls und Panzer assembly support pls

    So the transformer is AC not DC.. DC it would matter because of + and -. In your case with the transformer you just need to be aware of which side is in and which side is out. So long as you keep those wires apart.. (don't mix in and out together) it doesn't matter because its AC. As for transformer rating.. good question I would defer to someone more familiar with the power requirements of this machine.. I believe mine are all in the 5A range.

    As for Garupan I know someone who would likely sell a kidney for this machine..
    What did it end up costing you if you don't mind me asking?

  12. The following user says "Thanks" to stampeed valkyrie


  13. #8
    Pachi Puro KimbaWLion's Avatar
    Join Date
    Jan 2010
    Location
    JUST outside Philadephia Pennsylvania
    Posts
    2,651
    Thanks
    5,026
    Thanks Received
    2,457

    Default Re: CR Girls und Panzer assembly support pls

    This link get posted a lot but PowerVolt is the probable the best and easiest transformer to get.
    Transformers by PowerVolt
    I may not be the best guy, BUT I am not the bad guy!- Coop from Megas XLR

  14. The following user says "Thanks" to KimbaWLion


  15. #9
    Blind Shooter 1manshow's Avatar
    Join Date
    Jul 2008
    Location
    Henau
    Posts
    32
    Thanks
    36
    Thanks Received
    42

    Default Re: CR Girls und Panzer assembly support pls

    Quote Originally Posted by stampeed valkyrie View Post
    So the transformer is AC not DC.. DC it would matter because of + and -. In your case with the transformer you just need to be aware of which side is in and which side is out. So long as you keep those wires apart.. (don't mix in and out together) it doesn't matter because its AC. As for transformer rating.. good question I would defer to someone more familiar with the power requirements of this machine.. I believe mine are all in the 5A range.

    As for Garupan I know someone who would likely sell a kidney for this machine..
    What did it end up costing you if you don't mind me asking?
    The machine was ~200$. Shipping double that amount...

  16. The following user says "Thanks" to 1manshow


  17. #10
    Blind Shooter 1manshow's Avatar
    Join Date
    Jul 2008
    Location
    Henau
    Posts
    32
    Thanks
    36
    Thanks Received
    42

    Default Re: CR Girls und Panzer assembly support pls

    Thanks for the support. Today finished the electric stuff.

    https://youtu.be/ux7lIMbpJ7o

    https://youtu.be/ycYutmmWenk

  18. The following 6 users say "Thanks" to 1manshow


Similar Threads

  1. Replies: 11
    Last Post: 03-22-2016, 03:10 AM
  2. Girsl Und Panzer Pachislo
    By Drunkenclam in forum Model Talk
    Replies: 5
    Last Post: 09-11-2015, 01:51 PM
  3. Anyone know how to get the shooting lever assembly apart?
    By Corrupt_rev in forum Vintage Pachinko
    Replies: 4
    Last Post: 01-16-2015, 02:15 AM
  4. Looking for a Payout Motor Assembly
    By musky in forum Pachinko Modifications
    Replies: 6
    Last Post: 10-03-2008, 05:01 PM
  5. Assembly Instructions
    By doug in forum Dear Arby
    Replies: 2
    Last Post: 06-01-2008, 11:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •