Results 1 to 11 of 11

Thread: Golgo13 Hopper connection

  1. #1
    Tokie Owens Big Frank's Avatar
    Join Date
    Dec 2016
    Location
    Pennsylvania
    Posts
    5
    Thanks
    1
    Thanks Received
    3

    Default Golgo13 Hopper connection

    I have a bundle of wires from the power supply that connect into the hopper but the red wire and white wire are disconnected. Does anyone know were these two wires connect? Thanks Frank

  2. #2
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: Golgo13 Hopper connection

    pictures would be a great help

    and of course






    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  3. The following user says "Thanks" to Moparformances


  4. #3
    Pachi Puro Peteybob's Avatar
    Join Date
    May 2013
    Location
    Grand Rapids, Michigan
    Posts
    6,029
    Thanks
    6,576
    Thanks Received
    3,677

    Default Re: Golgo13 Hopper connection

    Hello Frank and welcome to the group!

    The wires might be for an overflow sensor used in a parlor. Have you tried playing the machine and are there any known problems?

    Like Moparformances says, pictures help a lot. Others will be along as well

  5. The following 2 users say "Thanks" to Peteybob


  6. #4
    Sandwich Shooter stampeed valkyrie's Avatar
    Join Date
    Feb 2015
    Location
    PA
    Posts
    450
    Thanks
    114
    Thanks Received
    598

    Default Re: Golgo13 Hopper connection

    Which Golgo 13 machine are we talking about?
    There are several.. If it s the older machine I have it in storage and may be able to get some pictures of the internals..

  7. The following 2 users say "Thanks" to stampeed valkyrie


  8. #5
    Tokie Owens Big Frank's Avatar
    Join Date
    Dec 2016
    Location
    Pennsylvania
    Posts
    5
    Thanks
    1
    Thanks Received
    3

    Default Re: Golgo13 Hopper connection

    [QUOTE=Peteybob;559076]Hello Frank and welcome to the group!

    The wires might be for an overflow sensor used in a parlor. Have you tried playing the machine and are there any known problems?

    Like Moparformances says, pictures help a lot. Others will be along as well [/QUOTE

  9. #6
    Tokie Owens Big Frank's Avatar
    Join Date
    Dec 2016
    Location
    Pennsylvania
    Posts
    5
    Thanks
    1
    Thanks Received
    3

    Default Re: Golgo13 Hopper connection

    [QUOTE=Peteybob;559076]Hello Frank and welcome to the group!

    The wires might be for an overflow sensor used in a parlor. Have you tried playing the machine and are there any known problems?

    Like Moparformances says, pictures help a lot. Others will be along as well [/QUOTE The only problem with it right now is when the credits max at 50 the hopper doesn't dispense tokens and I get an E2 error message and a annoying alarm sound. I going to clean the hopper and if that doesn't work I will get back to you. Thanks Frank

  10. The following user says "Thanks" to Big Frank


  11. #7
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,442
    Thanks Received
    18,805

    Default Re: Golgo13 Hopper connection

    I had the payout fault on a Sankyo Bisty slo. Tested to make sure the motor worked using a 12v battery on to the motor. Turned out my psu was bad and not sending voltage to the hopper when requested so causing a hopper empty error.
    Ian #UKPachinko

  12. The following user says "Thanks" to Drunkenclam


  13. #8
    Sandwich Shooter stampeed valkyrie's Avatar
    Join Date
    Feb 2015
    Location
    PA
    Posts
    450
    Thanks
    114
    Thanks Received
    598

    Default Re: Golgo13 Hopper connection

    The only hopper issue I had with my machine was when I first got it..
    Tokens had gotten themselves wedged under the sorter/spinner. I took the hopper apart and cleared the coins and the error condition went away.

    I'm still curious as to what version of the machine your talking about.. wires just hanging lose is generally not a good thing.

  14. #9
    Tokie Owens Big Frank's Avatar
    Join Date
    Dec 2016
    Location
    Pennsylvania
    Posts
    5
    Thanks
    1
    Thanks Received
    3

    Default Re: Golgo13 Hopper connection

    Quote Originally Posted by stampeed valkyrie View Post
    The only hopper issue I had with my machine was when I first got it..
    Tokens had gotten themselves wedged under the sorter/spinner. I took the hopper apart and cleared the coins and the error condition went away.

    I'm still curious as to what version of the machine your talking about.. wires just hanging lose is generally not a good thing.
    It is Golgo13 Perfect Machine of Snipe/The Professional. Peteybob believes the extra 2 wire are for overflow to other machine like in a gaming parlor. I solved the hopper issue while cleaning it. One of the prongs was bent in the feed that plugs into the hopper. I straightened the pin out and the hopper dispensed coins after the 50 credit max. Thanks Again Frank

  15. #10
    Tokie Owens Big Frank's Avatar
    Join Date
    Dec 2016
    Location
    Pennsylvania
    Posts
    5
    Thanks
    1
    Thanks Received
    3

    Default Re: Golgo13 Hopper connection

    [QUOTE=Big Frank;559193]
    Quote Originally Posted by Peteybob View Post
    Hello Frank and welcome to the group!

    The wires might be for an overflow sensor used in a parlor. Have you tried playing the machine and are there any known problems?

    Like Moparformances says, pictures help a lot. Others will be along as well [/QUOTE The only problem with it right now is when the credits max at 50 the hopper doesn't dispense tokens and I get an E2 error message and a annoying alarm sound. I going to clean the hopper and if that doesn't work I will get back to you. Thanks Frank
    Upon cleaning the hopper I found that one of the prongs from the feed that plugs into the hopper was bent. I straightened it out,plugged it in and it works perfectly. Thanks again for your input. Frank

  16. The following 2 users say "Thanks" to Big Frank


  17. #11
    Pachi Puro Peteybob's Avatar
    Join Date
    May 2013
    Location
    Grand Rapids, Michigan
    Posts
    6,029
    Thanks
    6,576
    Thanks Received
    3,677

    Default Re: Golgo13 Hopper connection

    [QUOTE=Big Frank;559234]
    Quote Originally Posted by Big Frank View Post
    Upon cleaning the hopper I found that one of the prongs from the feed that plugs into the hopper was bent. I straightened it out,plugged it in and it works perfectly. Thanks again for your input. Frank
    Glad you got it worked out Frank!

Similar Threads

  1. Need Taiyo Twin Surfer hopper motor, or brushes, or hopper.whatever is available
    By geezer49 in forum Pachislo Technical Support Tickets
    Replies: 5
    Last Post: 10-21-2013, 08:32 PM
  2. golgo13 hopper replacement chip
    By thatsnotgood in forum Pachislo Technical Support Tickets
    Replies: 2
    Last Post: 08-29-2013, 10:37 AM
  3. Golgo13 E4 hopper error
    By thatsnotgood in forum Pachislo Technical Support Tickets
    Replies: 3
    Last Post: 07-20-2013, 01:32 PM
  4. Golgo13 hopper not working
    By slotmaster in forum Pachislo Technical Support Tickets
    Replies: 17
    Last Post: 09-08-2009, 04:14 PM
  5. Sold Golgo13 on EBAY-$65
    By Nikoman in forum eBay - General Auction listings
    Replies: 4
    Last Post: 05-16-2005, 11:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •