Daiichi payout issue

[Mrtoad]

Hi,

i am am having a payout issue on my Daiichi where 6 or 7 balls go to the top tray and 8 or 9 to the bottom tray. I assumed it might be an issue with the piece that gmwd is trying to make for me. I thought maybe it was to slow the balls to the payout and so temporarily put heavy card stock in the there to see if corrected it but still same issue. Any ideas?

this is the piece that is missing that I was referring to. http://www.pachitalk.com/forums/vint...need-help.html

thanks,
Mike

[Tink]

I have the same issue on the one I have restored, I suspect it is just the nature of the Daiichi beast.

[Mrtoad]

Weird. There has to be something that is causing it. Hmmmm...

[Mrtoad]

Just bumping this to see if anybody else with a Daiichi machine has had similar issues as both of us.

Thanks!
Mike

[Gmwd]

Mine did that but after taking apart all the linkages and polishing everything it hasnt since. I also keep the fill tray over full on that machine as it tends to act up if low

[Mrtoad]

Thanks for the reply. Unfortunately the one that I am assuming is causing it is the I can't get to which is inside the lower housing right below the payout. I have cleaned the inside best I can with a bottle brush but can't take apart to get to the pivot.