need help

[Engravex]

I just purchased my first Pachinko machine a Nishijin model. I am still trying to figure out the year, but I thinks early 70's. The flipper mechanism is missing the wire that attaches to the plastic part that drops the next ball to be flipped, and possibly the large spring. Where can I get this or can I make it? Any help on restoring it would be greatly appreciated. I bought a book on it, but real lifers are great to listen to as well.
Thanks,

Lisa

[Tink]

Hello and welcome. Could you post some pictures?

[Moparformances]

pictures are a great help...

we have a few members that sell parts.. im sure they will be along shortly to lend a hand...

and of course

Welcome to Pachitalk

[Spyder138]

Welcome to Pachitalk. As was already said, pictures are always a big help.

[Engravex]

Here are some pics that I took last night.20160718_201657_1468947531007_resized.jpg20160718_201706_1468947529772_resized.jpg20160718_201839_1468947528363_resized.jpg
Like I said, I believe there is a wire that comes off that nut that pulls back the plastic tab to load the next ball.

[Tink]

Here are some pics that I took last night.20160718_201657_1468947531007_resized.jpg20160718_201706_1468947529772_resized.jpg20160718_201839_1468947528363_resized.jpg
Like I said, I believe there is a wire that comes off that nut that pulls back the plastic tab to load the next ball.

You are correct, also your overflow wire is on the wrong sire of the loader.

try these, from a Nishijin B.Shooter wire 1.jpgShooter wire.jpg

[Engravex]

which wire is that, the electrical? or the other hard wire? Any idea where to get the part?

Lisa

[Tink]

The hard wire for the overflow is on the wrong side of the plastic loader lever. You can make the missing wire with some rugged wire bent to shape and attach it behind the nut.

[Moparformances]

which wire is that, the electrical? or the other hard wire? Any idea where to get the part?

Lisa

something simple like one of thouse heavy duty paperclips...