SS Trim screws

[davebuckholts]

Found these stainless screws for the chrome trim on a lot of machines, from this company. #4 X 5/8". I ordered 100. Shipping was more than the screws. I'll let you guys know how they look installed.

screws.jpg

Screws were $2.48 and shipping was $5.95 (!). Couldn't find a local supplier.

[davebuckholts]

DOH!

http://www.albanycountyfasteners.com...-p/3400000.htm

[cardwwi]

Thanks, I have been getting them here https://www.boltdepot.com/Product-De...x?product=2250 but your supplier will save me about $10 on my next bulk order of 1000. FYI They look great on the machine almost like they where made for it.

[CarlW]

They are available at my local Ace Hardware store, I usually use 3/4" length on Model B's because the extra little bit of grip...

Can't go too far wrong on less than $10

[mxfaiman]

Yep. I buy them at Ace in boxes of 100.

Stick them in a piece of wood and polish them with a buffing wheel before installing and they look amazing.

[davebuckholts]

Yep. I buy them at Ace in boxes of 100.

Stick them in a piece of wood and polish them with a buffing wheel before installing and they look amazing.

Worked like a charm! I just screwed them in almost all the way and then ran my buffing wheel over them with some jewelers rouge on it. Nice and chrome looking. They appear original.

[mxfaiman]

Worked like a charm! I just screwed them in almost all the way and then ran my buffing wheel over them with some jewelers rouge on it. Nice and chrome looking. They appear original.

Yep. Its amazing how shiny they can get.