Auto Stop on Super Black Jack

[pachitom]

I just received my Super Black Jack replacement from Valley Gaming. This one made the trip in spite of FedEx.
I was planning on adding one of Vince's mod chips to the reel stop board mainly for the credit function. But to my surprise the reel stop board is completely different than my three other machines. The reel stop board is about half the size of the others.
Has anyone added a mod chip to a Net reel stop board?
I have an email in to Vince to see if he has had any experience with a Net machine reel stop board.

Thanks in advance for any help.. Tom

[autoslot]

Assuming it has the same 30 pin connector as normal stop boards, you could try using a stop board from another machine on it. (Don't blame me if it smokes something!)

If that board functions properly using an autostop chip in your Super Black Jack you then have 2 options.

The first is to buy one of my cable models and just plug it in!

The second option would be to locate the 5V trace on the board and connect that to pin 1. The pins 5,6,7 and 8 would wire to the last 4 pins of the 30 pin connector, similar to the points I show on the back of a normal stop board, as shown:http://www.autoslot.info/BRDBCK.JPG
Good Luck!

Vince

[Tulsa]

It doesn't use the same 30 pin connector. It uses a 6 pin connector. The good thing is pachitom can't hook up another stop board, so he's not going to smoke his SBJ.