Results 1 to 19 of 19

Thread: Penguin

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,235
    Thanks
    4,680
    Thanks Received
    4,663

    Default Re: Penguin

    Quote Originally Posted by lotsoballs View Post
    <br>
    1. Balls not flowing from the outer chute down to the ball counter/payout mech (usually tapping on chute or banging on the top of the machine will dislodge), drain all the balls if that doesn't work and try again.
    <br>
    That sounds exactly like the problen. The stoppage is in fact the outer track, and right at the ball counter. Tapping it doesn't make balls flow, I had to use a pick to push them through. Access through the slots in bottom of track. Is not hard to push through, but there is some resistance. Once balls are filled back to thois point, still wouldn't shoot. Tapping the counter area caused a payout. Would flow balls for a minute...then jam again. This was during a "333" payout (a reach?) so a DaveRob dongle was not necessary to force payouts. When draining balls, still hangs up occasionally. Removing, cleaning and inspecting the whole top tray and feeder ramps did not reveal any clues. I expect a mechanical blockage somehow. I will focus on the ball counter area since that is where they stop. Plus it easily slides out by depressing a tab. I was trying to add a Gaku pachicounter at this location, and had the penguin ball counter in and out a number of times. Don't know if the problem was happening before that or not. <br>
    I,m not at the other house to test the 2nd theory. I do have a DaveRob dongle, so I will give that a try. I had to switch back to a standard bypass dongle when I screwed it to the wall. When the DaveRob is installed it touches the wall and presses the circuit board in about 1/16". I'm going to look for a short cable to let it hang down, or Velcro it somewhere. I will use it for troubleshooting while the door is open. Thanks for the tip!<br>
    <img src="http://www.pachitalk.com/forums/attachment.php?attachmentid=83664&amp;stc=1" attachmentid="83664" alt="" id="vbattach_83664" class="previewthumb"> Is this the sequence number...of penguin machines made? 20,090 seems like an alful big production run for a machine that is not seen often.&nbsp;<br>By the way, what are the odds on your machine?&nbsp;<img src="http://www.pachitalk.com/forums/attachment.php?attachmentid=83665&amp;stc=1" attachmentid="83665" alt="" id="vbattach_83665" class="previewthumb"> 1 in 43.857 (in case the pic is not focused...stupid Kindle camera!)
    Attached Images Attached Images

Similar Threads

  1. Maturi Penguin
    By Drunkenclam in forum Yahoo Japan - Auction Area
    Replies: 5
    Last Post: 05-01-2015, 11:51 AM
  2. Penguin
    By Colinb913 in forum Pachinko Technical Support Tickets
    Replies: 3
    Last Post: 11-23-2008, 06:09 PM
  3. Penguin
    By DrDark in forum eBay - General Auction listings
    Replies: 9
    Last Post: 03-17-2007, 04:57 PM
  4. The Penguin!
    By doodude in forum Modern Pachinko
    Replies: 37
    Last Post: 06-15-2005, 01:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •