Page 1 of 2 1 2 LastLast
Results 1 to 20 of 24

Thread: Day 2 pachinko 2 issue

  1. #1
    Eye Shooter Gmwd's Avatar
    Join Date
    Jul 2015
    Location
    Illinois
    Posts
    556
    Thanks
    680
    Thanks Received
    601

    Default Day 2 pachinko 2 issue

    Ok so new thread because this appears to be an issue. The machine I have is suppose to play as it should... Surely I wouldn't have been lied to so I must be missing something ;-). Here are pictures of the back. It appears to me that the machine is not paying out and I'm not sure why. You can play but even when you hit the tulips nothing happens. Please help the best you can. And thank you in advance :-). I am also curious as to where the 9v would go????
    Attached Images Attached Images

  2. #2
    Eye Shooter Gmwd's Avatar
    Join Date
    Jul 2015
    Location
    Illinois
    Posts
    556
    Thanks
    680
    Thanks Received
    601

    Default Re: Day 2 pachinko 2 issue

    Third picture that wouldn't attach for whatever reason :-D
    Attached Images Attached Images

  3. #3
    Eye Shooter Spyder138's Avatar
    Join Date
    Sep 2014
    Location
    San Jose, CA
    Posts
    798
    Thanks
    2,314
    Thanks Received
    1,285

    Default Re: Day 2 pachinko 2 issue

    Hard to see, but looks like your see saw may be in the down position. Try resetting to the up position and see if it has a small ball jam waiting to be paid out.

  4. The following 4 users say "Thanks" to Spyder138


  5. #4
    Eye Shooter Gmwd's Avatar
    Join Date
    Jul 2015
    Location
    Illinois
    Posts
    556
    Thanks
    680
    Thanks Received
    601

    Default Re: Day 2 pachinko 2 issue

    Forgive my ignorance but seesaw???

  6. #5
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,452
    Thanks
    23,994
    Thanks Received
    10,874

    Default Re: Day 2 pachinko 2 issue

    i see a few issues..

    first off take a look at this..

    http://www.pachitalk.com/forums/vint...l-c-video.html

    next post for the isuess
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  7. The following user says "Thanks" to Moparformances


  8. #6
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,452
    Thanks
    23,994
    Thanks Received
    10,874

    Default Re: Day 2 pachinko 2 issue

    your first pic in both post..

    if you look at that picture i see at least two pachinko balls.. thouse balls need to be removed.. they should not be there and may be causing problems with the payout cycle..

    the last picture of your second post has a ball in the upper right corner... that ball needs to be removed..

    looks like if you reset the jackpot you should be good
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  9. The following user says "Thanks" to Moparformances


  10. #7
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,452
    Thanks
    23,994
    Thanks Received
    10,874

    Default Re: Day 2 pachinko 2 issue

    Quote Originally Posted by Gmwd View Post
    Forgive my ignorance but seesaw???
    watch vid at about 1:40
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  11. The following user says "Thanks" to Moparformances


  12. #8
    Eye Shooter Gmwd's Avatar
    Join Date
    Jul 2015
    Location
    Illinois
    Posts
    556
    Thanks
    680
    Thanks Received
    601

    Default Re: Day 2 pachinko 2 issue

    Molar removing balls now. I have found 10 in random places lol. Still looking

  13. The following user says "Thanks" to Gmwd


  14. #9
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,452
    Thanks
    23,994
    Thanks Received
    10,874

    Default Re: Day 2 pachinko 2 issue

    Quote Originally Posted by Gmwd View Post
    Molar removing balls now. I have found 10 in random places lol. Still looking
    LOL i have been calls a few names.. that has to be the best
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  15. The following 3 users say "Thanks" to Moparformances


  16. #10
    Eye Shooter Gmwd's Avatar
    Join Date
    Jul 2015
    Location
    Illinois
    Posts
    556
    Thanks
    680
    Thanks Received
    601

    Default Re: Day 2 pachinko 2 issue

    Lmao!!!! Mopar*** I'm sorry. Auto correct really hates me. About to post a few more issue pictures

  17. The following user says "Thanks" to Gmwd


  18. #11
    Eye Shooter Gmwd's Avatar
    Join Date
    Jul 2015
    Location
    Illinois
    Posts
    556
    Thanks
    680
    Thanks Received
    601

    Default Re: Day 2 pachinko 2 issue

    Ok the first picture looks broke. The other picture is the other side appearing to be intact. The 3rd picture is how do I get to these ?
    Attached Images Attached Images

  19. The following user says "Thanks" to Gmwd


  20. #12
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,452
    Thanks
    23,994
    Thanks Received
    10,874

    Default Re: Day 2 pachinko 2 issue

    the broken parts are something your going to have to explore and tinker with..

    the stuck balls are easy.. you have a model "C" machine.. in the last pic you posted there are 2 balls (ha i know duh) just above them is a thumb catch.. there are a few of these on your machine.. the one in the lower right section still has its locking plug installed.. remove the black locking plug, start on the left side and squeeze them pinch them closed.. this will alow you to remove the back.. you might no have to take them all loose but this should allow you to gain access to that area..
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  21. The following 2 users say "Thanks" to Moparformances


  22. #13
    Eye Shooter Gmwd's Avatar
    Join Date
    Jul 2015
    Location
    Illinois
    Posts
    556
    Thanks
    680
    Thanks Received
    601

    Default Re: Day 2 pachinko 2 issue

    Success!!!! And hahahhahahahaah 2 balls stuck.
    What do you mean tinker with the broken ?

  23. #14
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,452
    Thanks
    23,994
    Thanks Received
    10,874

    Default Re: Day 2 pachinko 2 issue

    based on the pictures you posted its nearly impossible to see exactly what is or is not broken.. if i had the same machine in front of me I could give you all kinds of advice..


    now that you have the balls out of the places they should not be.. load it up and see how it plays.. see if the machine plays like it should.. if tulips stay open or stay closed then you might have to open it up and take a look at its insides..
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  24. The following user says "Thanks" to Moparformances


  25. #15
    Eye Shooter Gmwd's Avatar
    Join Date
    Jul 2015
    Location
    Illinois
    Posts
    556
    Thanks
    680
    Thanks Received
    601

    Default Re: Day 2 pachinko 2 issue

    It's hard for me to explain but I took some better pictures. This is the mechanism for the tulips at the bottom of the machine. The first picture has a roller looking thing ontop of the arm causing the tulip to act flaky. The 2nd picture is the other tulip with the roller attached.
    Attached Images Attached Images

  26. The following 2 users say "Thanks" to Gmwd


  27. #16
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,452
    Thanks
    23,994
    Thanks Received
    10,874

    Default Re: Day 2 pachinko 2 issue

    now i see it.. the weight has broken off and is sitting on the top.. (empty all the balls from the machine) try tipping the machine on its side im sure the weight will fall to the other side.. you need to take the machine apart and use something (I like 2 part 5 min epoxy) to reattach the weight back in place.. both side should look exactly the same but total opposites of each other (aka mirrored)
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  28. The following user says "Thanks" to Moparformances


  29. #17
    Eye Shooter Gmwd's Avatar
    Join Date
    Jul 2015
    Location
    Illinois
    Posts
    556
    Thanks
    680
    Thanks Received
    601

    Default Re: Day 2 pachinko 2 issue

    I can just glue it on ? It doesn't need to roll? Is this a typical breaking part? I have a 3d printer at work so could make a handful of them on mondaynfairly easily.

  30. #18
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    12,452
    Thanks
    23,994
    Thanks Received
    10,874

    Default Re: Day 2 pachinko 2 issue

    no it does not roll.. reglue or 3d print.. same thing same thing..

    reglue is just allot easier for me..
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  31. #19
    Eye Shooter Gmwd's Avatar
    Join Date
    Jul 2015
    Location
    Illinois
    Posts
    556
    Thanks
    680
    Thanks Received
    601

    Default Re: Day 2 pachinko 2 issue

    Re glue it is! Print som later if it breaks again (batch of 10 if it breaks again haha)

  32. The following 4 users say "Thanks" to Gmwd


  33. #20
    Eye Shooter Gmwd's Avatar
    Join Date
    Jul 2015
    Location
    Illinois
    Posts
    556
    Thanks
    680
    Thanks Received
    601

    Default Re: Day 2 pachinko 2 issue

    In speaking of 3d printing I am going to make a couple hoppers this week , probably will make some spares if you need anything let me know I might be able to help you out for all the help your giving me!

  34. The following 2 users say "Thanks" to Gmwd


Page 1 of 2 1 2 LastLast

Similar Threads

  1. Another Matrix issue help needed please screen graphic glitch issue
    By ryantiger99 in forum Pachinko Technical Support Tickets
    Replies: 38
    Last Post: 01-11-2014, 10:37 AM
  2. Pachinko lock modification issue
    By Tazman in forum Pachinko Modifications
    Replies: 9
    Last Post: 01-21-2012, 06:53 PM
  3. An unsual issue with a old pachinko machine
    By Norrec in forum Vintage Pachinko
    Replies: 20
    Last Post: 08-12-2011, 09:27 PM
  4. Issue with 'tulip' on LOTR Pachinko
    By Bencrest in forum Pachinko Modifications
    Replies: 5
    Last Post: 06-25-2006, 11:18 AM
  5. K1 LCD Set up issue
    By dnketc in forum Pachislo Modifications
    Replies: 21
    Last Post: 06-14-2005, 12:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •