Mizuho hopper needed

[MagicDan]

I'm in the process of restoring my third machine and am looking for an upper hopper for a Mizuho machine. Is it safe to say that those parts are pretty common and I wouldn't need to specifically get one for a Mizuho?
Anybody got one?

Thanks

MagicDan

[mxfaiman]

to Pachitalk!

Parts are actually kinda hard to come by as you have to find a donor machine that someone has. Luckily a mizuho had a fairly common rear tray that was widely used. So you should be able to use a tray from a mizuho, ginza, sankyo, daiichi, & possibly sanyo. Your best bet is to keep an eye on ebay. There are a few people on there constantly selling parts. Or you might get lucky and someone here might have one they can spare.

Post some pictures of the area as there is one variation of mizuho that has a different tray style. (which could be easier or harder to find).

[Phulkrum]

Do you have pics of the back of your unit ?
I may have what you need..

I'm in the process of restoring my third machine and am looking for an upper hopper for a Mizuho machine. Is it safe to say that those parts are pretty common and I wouldn't need to specifically get one for a Mizuho?
Anybody got one?

Thanks

MagicDan

[Moparformances]

Welcome to Pachitalk

[takethecastle57]

to the site that Never Closes ( Someone is online here )

Good , Clear Photos help us more to help you and I think we have a little thread on here that can walk you thru the posting of them and here we go

http://www.pachitalk.com/forums/gene...-pictures.html

[MagicDan]

Do you have pics of the back of your unit ?
I may have what you need..

image.jpg

This was taken before I started the restoration. Little hard to see but the supply hopper has the front side broken out. I've repaired it with a piece of aluminum, but would prefer to replace the hopper itself.