Need help identifying wiring on early modern kyoraku
Hi all!
Just got an incomplete Kyoraku Early Modern (Columbia space shuttle) pachi and need some info on the wiring.
It is incomplete as I suspect it had some sort of PCB where the red wire socket terminates:
I'm going to hook it up to an Arduino microcontroller board and write my own jackpot and other needed routines using the arduino (should be fun)
Now about these loose wires:
Mostly around the ball launch motor:
(see pic) motor1.JPG
Q. Is the loose black wire on the left of the red box just a ground (unusual for a ground wire to be black)
Q. What do these two sockets do on the right of the motor do?
Missing PCB would go here I presume red wire connected power to it? (will implement arduino here)
(see pic) missing_pcb.JPG
Power input
(see pic) power_in.JPG
Q. Is the loose plug just for parlor extras or aux voltage (will test with multimeter anyway)
And here is the whole front & back of the machine
(see pics)
front1.JPG back1.jpg
And here is a piccie of my latest restore GIRL FEVER (I completely stripped it down cleaned & polished and rebuilt with a front power button and volume dial on JP tray
girl_fever.JPG
thyanks pachitalkers for your help
Reply With Quote
