3D Printed Pachinko Parts

[Matstermind]

I decided to try it myself with some measurements off the machine and reference photos and surprisingly using this, wire coat hanger, and some weights, got it fully functional on the 2nd design iterationnishijin B empty hopper parts.zip. for the upper part that is weighed down when the hopper is full enough, instead of designing the whole thing and disassemble/reassemble the machine, i designed a part that would "clip" on to the lower part of the existing part to add a connection point for the wire linkage. not sure if they will work for you, but i attached them if anyone may find them useful.