E1 error on ICHIGEKI TEIOH Power AT

[Tazman]

I am getting an E1 error and not sure what that is for the Power AT ICHIGEKI TEIOH.

[jmaclerran]

A list of common Pachislo error codes. Hope this helps. Also have you tried to do a hard reset of your machine.

Error codes:
Error Code Meaning, And Solution
E-0/ (CE/CJ) A token slot is jammed. Push the button at the token slot.(some don’t have this and you need to
open the door an clear the jam)
E-1/ (HE/ HJ) The hopper may be jammed. Turn off your machine, remove the hopper and take out all the
tokens and look for what ever has jammed it.
E-2/ (HE/ HJ) Hopper dysfunction. Check the hopper.
E-3/ (HE) A hopper is empty. Refill the hopper.
E-4/ (RR) RAM error. Push the reset button.
E-5 Reel error. Restart the machine and push the reset button.
E-6/ (CO) Prize error. Push the reset button.
E-7 Hopper Overflow. Check the hopper, or the over flow sensors to the right of the hopper.
E-8 Hopper disconnected. Check the cable.
CE/ CJ/ C2 A token slot is jammed. Needs to be cleared and clean coin track with alcohol.
Then, press the reset button.

[Tazman]

I had checked for jammed coins and such. Found 1 and pressed reset which I think it's the one inside the door by the digital changer.

Thanks I did print that up. I probably had it but have moved and still finding things. haha

[Tazman]

Yea I checked through it again. Turned on the hopper and it is running fine and ejecting coins. None stuck anywhere. I pressed the reset on the hopper and the on inside the door. The digital display inside the door isn't on to change levels 0-5 or whatever the levels are I forget. Last I saw I had it on 0 but it isn't showing up.

Oh I haven't done a hard reset. What do I need to do again.

[Tazman]

Nevermind I got it. Working fine again figured it out. Thanks for your help.