Newbie wth many questions !!!

[sampson13132003]

Hello to all,
i have been lucky to receive a 1976 Sankyo machine. This poor machine has been sitting in storage for many many years. I stayed up until 2 am the first night, cleaning and polishing and I have it looking pretty good . I need help with a few things. First is getting the lights up and running. If anyone has any suggestions that would be great . I am going to attemp some before and after picture. Thanks so much . And I am so excited to start playing. These are the after pictures

[sampson13132003]

Attachment 80711Attachment 80712 Before pictures

[sampson13132003]

Hi all,

i have been lucky to receive a 1976 Sankyo machine. This poor machine has been sitting in storage for many many years. I stayed up until 2 am the first night, cleaning and polishing and I have it looking pretty good . I need help with a few things. First is getting the lights up and running. If anyone has any suggestions that would be great . I am going to attemp some before and after picture. Thanks so much . And I am so excited to start playing. These are the after pictures

[Moparformances]

looks like ya have a 9 volt hooked up..

ya will need to test to find the right combo.. my guess would be the white and black wires.. white with the fuse then one of the others..



Welcome to Pachitalk

[sampson13132003]

Thank you for the fast response. It had a 4 hole plastic adapter but I couldn't find anything that would fit . I have it hooked up to the 9 volt but the only light that came on was the top left hand corner. I was wondering is there a better adapter or better way to to wire it.

[Moparformances]

the 9 volt is an easy fix allows ya to put the machine anywhere.. i usually add a wall wart so the machine can be plugged in.. either way just solder the joint and cover with shrink tube..

the upper left is the low ball indicator.. the bulb in the center will light during the jackpot payout cycle

[Mr_Smeggers2]

Sweet chicken coop center. One of my faves.