Mizuho HELP

[donmalex]

I have a 1956 MIZUHO Clown
I have cleared all balls from machine.
I reloaded top hopper
I played until many balls were on sloping level ready to drop when seesaw was activated.
I physically put balls thru every hole in front three times, nothing happens .
There is a hole in back made to drop a ball thru to fall on the lever that a ball would fall on as if it came from the seesaw.
I put a ball thru the hole and a payout occurred.

I can trip the loaded seesaw from the up position to the down position manually and everything works as it shood.
BUT
I cannot find how to trip the loaded seesaw from the up position to the down position from playing.
There must be something that trips the seesaw when a ball is put thru the correct hole.
Don Alexander [IMG]file:///C:/DOCUME~1/Don/LOCALS~1/Temp/msohtmlclip1/01/clip_image001.png[/IMG][IMG]file:///C:/DOCUME~1/Don/LOCALS~1/Temp/msohtmlclip1/01/clip_image002.png[/IMG][IMG]file:///C:/DOCUME~1/Don/LOCALS~1/Temp/msohtmlclip1/01/clip_image003.png[/IMG]donmalex@aol.com

[CarlW]

The pictures didn't post Don.

It sounds like a single shot machine and maybe Model A type mechanics.

There are folks here that can help I think.

[mxfaiman]

to Pachitalk!

Try posting the pictures again. I'm trying to figure out what you are talking about and I'm kinda confused so I'm sure pictures would help.

[Moparformances]

yes pictures please

and of course

Welcome to Pachitalk

[takethecastle57]

Howdy Click the go advance box on the lower right of the reply box and post pictures as attachments