Results 1 to 12 of 12

Thread: New Here - Azteca issue.

  1. #1
    Tokie Owens Wicked_Elphaba's Avatar
    Join Date
    Nov 2014
    Location
    Florida
    Posts
    6
    Thanks
    1
    Thanks Received
    0

    Default New Here - Azteca issue.

    Hi all!

    I just got a slot today but the screen has this IMG_1046.jpgIMG_1045.jpg alternating on it. I wanted to get it running for my mom. The person I got it from said it just needed a reset. I tried that and it does nothing to help.

  2. #2
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,333
    Thanks
    51,524
    Thanks Received
    30,711

    Default Re: New Here - Azteca issue.

    Hello

    Welcome to PachiTalk, Did you do the soft reset or the full hard reset including the odds change?

    Most errors are usually remedied with the full reset, so just to double check that you are carrying out the complete hard reset

    Here is some info that explains how to reset a pachislo, as part of this process it includes how to change and set the skill level, you must follow all steps carefully


    "How To Set the Skill Levels of Your Pachislo
    HOW CHANGE ODDS:

    "TURN YOUR MACHINE OFF FIRST"

    1. Locate internal key switch, and insert key.
    Note: In order to change odds, machine must be in idle mode with no tokens/coins or credits being played and off.

    2. Turn "reset" key switch to on, to access programming mode.

    3. Turn on machine now.

    4. Depending on machine type, a number from 1 to 6 will be displayed on one of the LED meters on front door. (please note on some models the numbers could be displayed inside the machine)

    5. Locate and push Skill button. Depress button and notice movement of number being displayed in LED meter.

    6. Once desired level is displayed (1 to 6), push down on play handle (Joy Stick) for 10 seconds, and depress both "BET CREDITS" and "COLLECT CREDITS" buttons to lock odds level into machine memory.

    7. Turn "reset" key back to off.

    8. Machine should immediately initialize. If not, turn power switch to the OFF position, wait 15 seconds and turn power switch back to ON position.


    Also just to confirm some additional info (from member Chrisdice) regarding hard reset

    Two switches on the power supply:
    - One requires a soft reset at the end of a bonus.
    - The other pays out all tokens at the end of a bonus.

    For these switches in most cases off is in the down or right position. The for off and on are:

    無 = off

    有 = on



    Do let us know if this helps at all or if you require any further advice




    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  3. The following 3 users say "Thanks" to hanabi


  4. #3
    Tokie Owens Wicked_Elphaba's Avatar
    Join Date
    Nov 2014
    Location
    Florida
    Posts
    6
    Thanks
    1
    Thanks Received
    0

    Default Re: New Here - Azteca issue.

    I did not do this type of reset and will try once I get home and have my techy son help. Thanks so much!! Where is the 'skill' button. I have never used one of these or had a slot machine at all but I am hoping to get it going for my mom to have fun with and I think I got a pretty good deal for 500 tokens and the machine for $50?

    I will let you know how it goes!!

  5. #4
    Kungishi Wayne-Ooo's Avatar
    Join Date
    Oct 2011
    Location
    Lebanon, Indiana
    Posts
    1,710
    Thanks
    2,281
    Thanks Received
    4,976

    Default Re: New Here - Azteca issue.

    What if...​the ​HOKEY POKEY, is what it's all about?

  6. #5
    Tokie Owens Wicked_Elphaba's Avatar
    Join Date
    Nov 2014
    Location
    Florida
    Posts
    6
    Thanks
    1
    Thanks Received
    0

    Default Re: New Here - Azteca issue.

    So odds button = skill switch?
    No good deed goes unpunished

  7. #6
    Kungishi jmaclerran's Avatar
    Join Date
    Mar 2006
    Location
    Lewiston ID
    Posts
    1,012
    Thanks
    2,803
    Thanks Received
    1,136

    Default Re: New Here - Azteca issue.

    Your second picture says "Communication Error Please Wait"
    I've never met a Pachi I didn't like

  8. #7
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: New Here - Azteca issue.

    someone may have messed with the smaller buttons by the screen, its easy to get locked into some other mode.

    I never mess with those on any machines
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  9. #8
    Tokie Owens Wicked_Elphaba's Avatar
    Join Date
    Nov 2014
    Location
    Florida
    Posts
    6
    Thanks
    1
    Thanks Received
    0

    Default Re: New Here - Azteca issue.

    4. Depending on machine type, a number from 1 to 6 will be displayed on one of the LED meters on front door. (please note on some models the numbers could be displayed inside the machine)

    That never happens
    just shows the first two pics I posted on the screen.
    No good deed goes unpunished

  10. #9
    Kungishi Wayne-Ooo's Avatar
    Join Date
    Oct 2011
    Location
    Lebanon, Indiana
    Posts
    1,710
    Thanks
    2,281
    Thanks Received
    4,976

    Default Re: New Here - Azteca issue.

    When in Reset Mode, the images should disappear.

    Please make sure you are doing the reset properly. One wrong step and it doesn't work.

    Changing Odds & Full Reset.jpg
    What if...​the ​HOKEY POKEY, is what it's all about?

  11. The following user says "Thanks" to Wayne-Ooo


  12. #10
    Tokie Owens Wicked_Elphaba's Avatar
    Join Date
    Nov 2014
    Location
    Florida
    Posts
    6
    Thanks
    1
    Thanks Received
    0

    Default Re: New Here - Azteca issue.

    I can not get it to get past the error screen, it will not illuminate a number from 1-6 (Step 4) on the machine. It simply alternates the original pics I posted. Sorry to sound so stupid!
    No good deed goes unpunished

  13. #11
    Kungishi Wayne-Ooo's Avatar
    Join Date
    Oct 2011
    Location
    Lebanon, Indiana
    Posts
    1,710
    Thanks
    2,281
    Thanks Received
    4,976

    Default Re: New Here - Azteca issue.

    First off, you don't sound stupid. There aren't any manuals for these machines and we are pretty much on our own to figure things out.

    I would try the menu keys, while the machine is in reset mode. Try the buttons and arrow keys and see if that gets you anywhere.

    This may sound simple and pointless, but a lot of times just unplugging connections and resetting them works. It may take a few minutes, but I'd unplug and reset every connection in the machine.

    Sorry, but that's all I have to offer.
    What if...​the ​HOKEY POKEY, is what it's all about?

  14. The following 3 users say "Thanks" to Wayne-Ooo


  15. #12
    Tokie Owens Ismitty41's Avatar
    Join Date
    Jul 2017
    Location
    NC
    Posts
    1
    Thanks
    0
    Thanks Received
    0

    Default Re: New Here - Azteca issue.

    I've tried all the reset and it still doesn't work but my machine is throwing a CP error code and a ding noise that goes on and off note: only throws this code once I put a coin in and iv cleaned everything and checked all wiring

Similar Threads

  1. Another Matrix issue help needed please screen graphic glitch issue
    By ryantiger99 in forum Pachinko Technical Support Tickets
    Replies: 38
    Last Post: 01-11-2014, 10:37 AM
  2. Azteca in UK
    By Nibsy78 in forum eBay - General Auction listings
    Replies: 0
    Last Post: 11-05-2012, 04:38 PM
  3. Azteca in UK
    By Nibsy78 in forum Pachislo Listings / Ebay RSS feed
    Replies: 0
    Last Post: 11-05-2012, 04:38 PM
  4. Azteca Legend Gold-Azteca Legend Silver-Outlaw
    By RKnarr01 in forum Model Talk
    Replies: 15
    Last Post: 06-05-2007, 12:06 PM
  5. Azteca Legend
    By Drugdoc in forum Model Talk
    Replies: 4
    Last Post: 08-28-2005, 08:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •