Sankyo Payouts Looks like a model B

[usagib]

Hello! I've just gotten my first pachinko machine at a garage sale and i've been doing a lot of reading and was able to get it up and running after a few tweaks! - it's a Sankyo model, and it looks very much like a model b from what i can tell It has three tulips and two smaller prize hole areas. Whenever i set a ball through they seem to give the same pay out, and i was just wondering if they should give different pay out amounts, or if it's normal for them to be all about the same? Thanks for your help everyone!

[mxfaiman]

First to Pachitalk!

It should pay out 13 balls every time from any pocket. (or it may be an 11 mechanism. I can't remember which a sankyo is.) Either way yes it should pay out the same amount of balls every time.

Please post some pictures of your machine when you get a chance.

[Moparformances]

First to Pachitalk!

It should pay out 13 balls every time from any pocket. (or it may be an 11 mechanism. I can't remember which a sankyo is.) Either way yes it should pay out the same amount of balls every time.

Please post some pictures of your machine when you get a chance.

Welcome to Pachitalk

[usagib]

Thank you! ok good i'm glad, yes it seems to spit out 13 i think From what i can tell i lucked out pretty hard, i paid 40$ for the whole unit and about 250 balls. The guy i got it from said that it didn't work, but i took it home and it was just jammed so with a bit of jiggling i got all the jammed balls loose and it works like a charm! i'm making a cabinet for it now based on some of the plans i've seen online and want to get some more balls so i don't have to refill but am having a hard time finding places that will ship to canada for the cost of not an arm and a leg in shipping any suggestions welcomed!
Also if you guys have any ideas on if there is a fancy name for this one, that'd be nifty! (ive looked around and not seen any like it, it's got two ostrich looking birds in the middle)

[usagib]

IMG_20140818_213102.jpgIMG_20140818_212913.jpgIMG_20140818_212940.jpg

[Moparformances]

looks like a nice machine..

I dont think i have seen that particular center feature before..please post a nice closeup of the center feature..

as for a "fancy name"?? with a bird center feature it looks like a "Bill" machine Bill sounds good to me

99% of vintage machines do not have names