Satomi Miracle Project Begins!

[Phulkrum]

Just got a translation back from my friend about the internal sticker inside the unit.. thought you folks would appreciate it!!!

DSCF0069.jpg




Warning

1. When adjusting the interior, please make sure that the power is turned off.
2. When replacing the lamp/light, please make sure that you use a lamp/light with the specifications of 12V 90mA.
3. As for the fuse, absolutely do not use one with a regulation of greater than 3A

hope this is helpful as it is to I for you other folks that have one of these units.
like I mentioned in a previous post the machine is impedance balanced and improper bulbs will cause the thing to malfunction.
Lower voltage will burn too hot and melt plastics. Higher voltage will burn at proper brightness but will also cause the thing to really misbehave.. lolz.