aristocrat baseball 2003 power supply help

[retromike]

Hi guys,

I've just picked up a baseball 2003 machine that would not power on, I opened up the power supply to find the main 10-12 amp fuse had blown it had a normal plug on it so I think he'd plugged it in to 240v supply instead of the 110v it should have been plugged in to

when I replaced the fuse and plugged it in to a 110v supply it blew again, I've been trying to find a circuit diagram to hopefully repair it as I can seem to find one for sale anywhere.

would really appreciate any help you guys have to offer so I can get it running again

here is the picture of the power supply

[Wayne-Ooo]

Hi guys,

when I replaced the fuse and plugged it in to a 110v supply it blew again,

I'm thinking the power supply should only have 24 volts running to it.

[retromike]

I'm thinking the power supply should only have 24 volts running to it.

Hi the only picture I've found says that the 110v goes in to the power pack at the top and comes out at 24 v

I'm new to these machines and would love to get it running as they look so cool ;-)

[Drunkenclam]

Not around that way for a while, but first off. The machine would either be labelled either 24vac or 100vac. Those are the 2 voltages pachislos use. I have one of each. I better not get them mixed up. I'll have a better look at your pics once I'm on the desktop not my phone.

Have a a look around the machine for the data plate That will confirm the voltage. I'll have a quick check on YJA and see if there is a replacement there. I can stick it in my next shipment. Or ask TSV (tomscottvicky)

[retromike]

This is my one :-)

[retromike]

This is my one :-)

ive just found this in the cab ... Now I'm really confused

[retromike]

Not around that way for a while, but first off. The machine would either be labelled either 24vac or 100vac. Those are the 2 voltages pachislos use. I have one of each. I better not get them mixed up. I'll have a better look at your pics once I'm on the desktop not my phone.

Have a a look around the machine for the data plate That will confirm the voltage. I'll have a quick check on YJA and see if there is a replacement there. I can stick it in my next shipment. Or ask TSV (tomscottvicky)

Hi I'm always around Surrey we've got family there so could pick it up if you find one 

[Drunkenclam]

I wouldn't trust the first picture but the red label seems to be the genuine one 24v rated at 250va. I'll have a hunt around later when Jr is asleep

[retromike]

Cool thank you :-)

[Drunkenclam]

I would hazard a guess the machine is one of the 巨人の星 series, Any chance of a picture of the front.

can't see an exact identical one but there is this one

北斗ã�®æ‹³ã€€é¬¼æ*¦è€…　4å�·æ©Ÿã€€é›»æº�BOXユニット - ヤフオク!

[retromike]

Is this pic better ? I'll upload a few close ups in a sec :-)

[retromike]

Are these ok ?

[prayerny1]

From my own research I found no Pachislot machines to operate any higher than 110Vac 10-12amps and 24vdc out.

[retromike]

I would hazard a guess the machine is one of the 巨人の星 series, Any chance of a picture of the front.

can't see an exact identical one but there is this one

北斗ã�®æ‹³ã€€é¬¼æ*¦è€…　4å�·æ©Ÿã€€é›»æº�BOXユニット - ヤフオク!

Hi I didn't realise that was a link the connectors look slightly different to my one but it's dam close :-)

[Drunkenclam]

I'll keep looking. Or if your mad. Search through the auctions yourself. Oh all of my pachinkos and pachislos I sourced from Japan. Then shipped to the UK, so it's not that mad but the only problem is

[retromike]

I've been playing with the power pack today and found one of the bridge rectifiers down to earth, I've managed to find a replacement part on eBay so hopefully I might be able to get it going again :-)

I will keep looking though just I case it's taken other components out that I can't find

I've stripped and cleaned the machine tonight for my first one I'm pleased with it just can't wait till it powers up for the first time to see if anything else is wrong :-)

I think I might add some more to my fairly large arcade collection :-)

cheers for everyones input will let you guys know how I get on

[Drunkenclam]

Maplins also sell some bridge rectifiers as well. You have quite a big one outside Poole. Time to search for a good power supply/transformer.

[retromike]

Defiantly need a new one :-(

if anyone knows of one for sale I'd be really grateful :-)

would really really like to get it running again :-)


cheers

[Wayne-Ooo]

I have this one. Do the connections look like what you need?

033.jpg

036.jpg

[heima]

That power supply is a Sammy. So... If you want to fix your power supply, you might want to take a read of this:
POPEYE and SATURDAY NIGHT FEVER PACHISLOS AVAILABLE- NOT FUNCTIONING!
and this
Sammy Aristocrat, Rodeo Reels Not Lighting - Page 2