SANKYO Vintage CYCLIC
Another project machine!
Mechanism was mostly missing on this machine. :-/
I'm going to use one of my counters / games.
As you can see, this machine has a very attractive play field with no water damage.
SANKYO Vintage Cyclic Front.jpg
The sides, top and ramps are made of wood pieces 5/8" thick on this machine by 3/4" tall.
The portions of wood exposed to pachinko balls were covered with metal tape.
Portions of one piece of wood were cut on 45 degree angles to direct the pachinko balls into the shooting tray.
Portions of the top ramp were removed to allow pachinko balls to exit the playfield main drain and to allow enough room under the top ramp.
SANKYO Vintage Cyclic Back.jpg SANKYO Vintage Cyclic Ramps.jpg SANKYO Vintage Cyclic Shooting Tray Exit.jpg SANKYO Vintage Cyclic WIN Switch.jpg
Reply With Quote
