hello. help please :

[liorillusion]

i have this pachinko machine kamen rider v3. this is new machine from box. never was in use...
i play 5-10 minuties and evreything works. and after i have problem: 排 出 エラ一 (something like this. i use google translate)
i dont know what is this problem but if i change the cell and put my akb47 cell on this frame evreything works gooood!
thank you and sorry about mn y english

[Drunkenclam]

Can you post a picture of the error. Does anything else happen. Alarm, screen goes blank, shooter stops working, frame lights go out?

[liorillusion]

Can you post a picture of the error. Does anything else happen. Alarm, screen goes blank, shooter stops working, frame lights go out?

yes i have alarm and the lights turn off...

[Drunkenclam]

排出エラー　Discharge, exhaust error. It might mean a payout error of some sort?

Is it payout out ok? on all pockets?

[liorillusion]

排出エラー　Discharge, exhaust error. It might mean a payout error of some sort?

Is it payout out ok? on all pockets?

yes its pay out. i play 5 minutie and after i see this problem... and the pay out i think she is ok...

[DukeOfDelmar]

排出エラー　Discharge, exhaust error.

With this translation - think it might be an overheating issue? Especially if it is tied to time played? I've never known pachinkos to overheat, but the super-moderns are getting quite complex and LCD screens can generate a bit of heat.

Train a fan on the back bits and see if it helps?

[Drunkenclam]

There is also a chance that the frame might look the same but not be fully compatible.
like the Heiwa lupinasu and Sanyo sea story Med, Carbi, premium2, Okinawa 2, they look the same, but same cels don't work on some frames.

[liorillusion]

With this translation - think it might be an overheating issue? Especially if it is tied to time played? I've never known pachinkos to overheat, but the super-moderns are getting quite complex and LCD screens can generate a bit of heat.

Train a fan on the back bits and see if it helps?

no its not this... this is because the pay out but what about the pay out???

[liorillusion]

i think i found the problem. i take out the cell and the frame and all the screw in the payout frame with the basket of the ball. and i found 1 conector with 2 wire. with no ware to connect. he comes from ware the balls drop wan you lost the ball in the game... the wire come from i think some sensor ware the ball drop whrn you lose them. like know how much ball drops... but why in my akb 48 machine the machine works great and on this machine the machine shows problem... my frame was home use but i change evreything i replace al the plastics and the wires and now its pay out system with my akb. but what is this problem?! please helppp







thanks

[Drunkenclam]

What is the 2 pin plug wired too. A ball sensor? or something else?

[liorillusion]

What is the 2 pin plug wired too. A ball sensor? or something else?

look i mark this with 2 red circle



and when i put the ball on the bonus hole or any all the machine say something in japnese...

[liorillusion]

???

[Drunkenclam]

Don't know. I guess that there is a socket hiding that it needs to plug into.

Most comments made online regarding AKB48 cels is this error occurs during a desktop conversion.

京楽ã�®ãƒ‘ãƒ�ンコå�°(セルå�´)ã�®åŠ*工方法ã�«ã�¤ã�„ã �¦ã€‚ AKB48ã€�太王四神記ã€�冬ã�®ã‚½ãƒŠã‚¿... - Yahoo!知æ�µè¢‹

But thats not what your doing.
There might be a socket you can't see, try looking on the other cels and see if the same componant is on them and where it goes.

I don't have any information on the frame or any cels for it

[liorillusion]

Don't know. I guess that there is a socket hiding that it needs to plug into.

Most comments made online regarding AKB48 cels is this error occurs during a desktop conversion.

京楽ã�®ãƒ‘ãƒ�ンコå�°(セルå�´)ã�®åŠ*工方法ã�«ã�¤ã�„ã �¦ã€‚ AKB48ã€�太王四神記ã€�冬ã�®ã‚½ãƒŠã‚¿... - Yahoo!知æ�µè¢‹

But thats not what your doing.
There might be a socket you can't see, try looking on the other cels and see if the same componant is on them and where it goes.

I don't have any information on the frame or any cels for it

the translate is not good you can give me please the guide what to do?

[Drunkenclam]

I don't know the answer. The link is someone asking a question about a desktop top unit that he had the same error.
Just look to see if you can find where it plugs in. On any of your cels.

[Chumsize]

Hmmm... Have you tried removing about 1/2 of the balls you have circulating in the system? The orange ball lifter looks WAY too full. My Heiwa frame w/certain cells will clog quickly if the ball lifter isn't kept very low. Unfortunately, it usually means I only can keep around 400 balls in the system.

SO give that a shot. And if it is indeed clogged in the cell, you'll need to clear all the balls out. Then clear out the path below the cell. I had one ball that was jammed way down in there and it was tricky to remove.

Finally... make sure the balls are feeding into the system correctly - Make sure the ball stop on the upper right isn't down

[Drunkenclam]

I think this error is generated if the machine detects a ball going into the start pocket, but fails to count a ball leaving the rear of the cel. Probably because that lead isn't plugged into anything. You really need to find where it goes to. There must be an empty socket somewhere it goes into.

[liorillusion]

Hmmm... Have you tried removing about 1/2 of the balls you have circulating in the system? The orange ball lifter looks WAY too full. My Heiwa frame w/certain cells will clog quickly if the ball lifter isn't kept very low. Unfortunately, it usually means I only can keep around 400 balls in the system.

SO give that a shot. And if it is indeed clogged in the cell, you'll need to clear all the balls out. Then clear out the path below the cell. I had one ball that was jammed way down in there and it was tricky to remove.

Finally... make sure the balls are feeding into the system correctly - Make sure the ball stop on the upper right isn't down

the ball lifter dosent connect... only test. and evreything its good and all the balls go good and its ok but the problem still happen

[liorillusion]

I think this error is generated if the machine detects a ball going into the start pocket, but fails to count a ball leaving the rear of the cel. Probably because that lead isn't plugged into anything. You really need to find where it goes to. There must be an empty socket somewhere it goes into.

the balls going good. and no place to connect this wire... and before i take of the frame also the problem was...

and maybe someone know how to connect a ball counter? (battle counter) maybe this is the problem?!

[liorillusion]

see this link please but this is akb48

‚`‚j‚a‚S‚W�ƒƒpƒ`ƒ“ƒR�EƒRƒ“ƒgƒ��[ƒ‰�„

and what is this?