nishijin lighting problem

[ANGRY GARY]

i have this nishijin machine. it runs fine and pay off fine. but there are a few lights that do not work. i have pointed them out in the pictures. i have done some little things like clean the pins and changed all bulbs. i have checked continuity on the wires. also there are no burnt traces and all the ic chips look fine. no heat damage or swelling.
i am stuck here. at times i think some will only light up when certain criteria is met during game play. i do not know.
i guess the easiest way to fix it is to replace the printed circuit board. the second easiest fix would be to have some schematics. i have neither. any help here?
thank you,
Gary

[CarlW]

I doubt that there are schematics available.

Those lights would only light up during certain situations, like a fever. Have you witnessed one?

Actually, I see you pointing at areas with a screwdriver but don't see any bulbs.

You did a nice job cleaning it up!

[ANGRY GARY]

I doubt that there are schematics available.

Those lights would only light up during certain situations, like a fever. Have you witnessed one?

Actually, I see you pointing at areas with a screwdriver but don't see any bulbs.

You did a nice job cleaning it up!

i was pointing to the area from the front so you would have a reference point. i will try to play it and get it in a fever mode. what do you think is needed to get it in a fever mode?

[CarlW]

Easiest to cheat to get it going.

Open front glass, drop pachinko ball in pocket labeled "2"; this opens wings for 2 seconds. So, within 2 seconds, get pachinko ball in center win pocket; labeled "V" usually.

Then keep feeding center pocket to keep it going.

[ANGRY GARY]

thanks, i will try that this evening when i get home.

[Drunkenclam]

then wait for the tamper alarm to go off

[ANGRY GARY]

Carl,
You are the man!! it worked exactly like you described! thank you sir!!

Gary

[hanabi]

So did the lights work during the Fever Round?

Presume it is now sorted?