Results 1 to 12 of 12

Thread: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

  1. #1
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    After spending some time with my lock smith, I have decided the best route for my lock problem on my JAWS machine is to find a replacement lock cylinder and key. I would certainly appreciate any and all help in tracking this down.

    Here are some pictures...

    image.jpgimage (4).jpgimage (3).jpg

    The shape of the back plate is important for the lock to fit properly. I do have the the "dog leg" that goes on the back of the lock.

    Here is one more picture of the back with the writing labeled...

    Back without Dog Tag.jpg

    Finally a picture of the machine...

    IMG_0806.jpgIMG_0635.jpg
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

  2. #2
    Kungishi jmaclerran's Avatar
    Join Date
    Mar 2006
    Location
    Lewiston ID
    Posts
    1,012
    Thanks
    2,819
    Thanks Received
    1,136

    Default Re: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    Here is a link to a YJA auction that looks like the Omron Lock you need. Juno may be able to help you out.鍵 シリンダー オ**ック 新旧どちらで も *ー - ヤフオク!
    I've never met a Pachi I didn't like

  3. #3
    Kungishi jmaclerran's Avatar
    Join Date
    Mar 2006
    Location
    Lewiston ID
    Posts
    1,012
    Thanks
    2,819
    Thanks Received
    1,136

    Default Re: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    I've never met a Pachi I didn't like

  4. #4
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,578
    Thanks
    13,483
    Thanks Received
    18,894

    Default Re: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    Didn't Vicki say she had some locks and keys?
    Ian #UKPachinko

  5. #5
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,235
    Thanks
    4,680
    Thanks Received
    4,663

    Default Re: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    I got mine from Candyflip. I don't know if he has any more...I think he got his from Gaku. It was the only time I saw one on eBay. He described it as rare as "rocking horse doo-doo!"

  6. #6
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    Thank you for the links. Those do look like the right ones. Going to contact Juno and see if I can get my hands on one of those for a decent price.
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

  7. #7
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    Juno is on the case. Hope to know something soon.
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

  8. The following user says "Thanks" to Card Shark


  9. #8
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    Just heard from Juno that I won the auction and the locks are being shipped. I hope one of these works. I may have a few left over if anybody needs one.
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

  10. The following 4 users say "Thanks" to Card Shark


  11. #9
    Sandwich Shooter Skydanz's Avatar
    Join Date
    Feb 2013
    Location
    San Jose, CA
    Posts
    287
    Thanks
    151
    Thanks Received
    248

    Default Re: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    You know I want at least one.
    スカイダンス

  12. #10
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    It will probably take a little while for them to arrive. Once they arrive, I will be happy to send you one. Just PM me where you would like it sent.
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

  13. The following user says "Thanks" to Card Shark


  14. #11
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    My locks from Juno arrived today

    All 4 work perfectly and I have already installed one on my JAWS machine. They did not come with keys however. The standard key I have works in all 4.

    If anybody needs a lock, just send me a PM, looks like I have a couple of spares.
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

  15. The following 3 users say "Thanks" to Card Shark


  16. #12
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: Need help locating an Omron Lock Cylinder and key for my Jaws Machine

    My two extra locks are now spoken for. Sending them out soon. Going to keep my last spare, just in case.

    Now just have a computer pachinko, vintage and an arrangeball that I want to get the locks working on.
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

  17. The following 4 users say "Thanks" to Card Shark


Similar Threads

  1. Needed: New Lock Cylinder
    By jetedrow in forum Pachislo Modifications
    Replies: 14
    Last Post: 10-28-2019, 07:39 PM
  2. Need a Lock Cylinder for a Babel Pachislo!!
    By dman in forum Model Talk
    Replies: 1
    Last Post: 10-09-2010, 11:33 PM
  3. Gundam Cabinet Lock Cylinder.
    By johnnynormal510 in forum Pachislo Technical Support Tickets
    Replies: 3
    Last Post: 05-03-2009, 12:49 AM
  4. IGT lock cylinder needed
    By minnesotabrad in forum Pachislo Technical Support Tickets
    Replies: 4
    Last Post: 11-15-2006, 10:55 PM
  5. Need an Omron lock.....
    By Bigsasquatch in forum Pachinko Modifications
    Replies: 7
    Last Post: 04-04-2006, 07:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •