Results 1 to 12 of 12

Thread: new to forum, need asistance with Pachinko machine.

  1. #1
    Tokie Owens Voska's Avatar
    Join Date
    Jul 2013
    Location
    Chicago IL
    Posts
    3
    Thanks
    0
    Thanks Received
    6

    Default new to forum, need asistance with Pachinko machine.

    Hello everyone,

    I am trying to fix/get working my fathers Pachinko machine as a surprise to him. I am a PC/Network Tech by trade and have a little bit of experience working with electronics. However pachinko machines were obviously never covered in my networking degree so I am a bit lost on this. I want to fix my fathers Pachinko machine as a surprise for him to put back on his bar in the basement but I cannot for the life of me find anything on the internet regarding this machine. According to my mother it was last working about 10 or 12 years ago and then something stopped working (obviously) it lit up but the balls wouldn't shoot. So I am assuming there is either a motor bad or jammed somewhere. Now unfortunately I don't see any power cord, though I have found a spot (with writing in Japanese) that says 24v, so I assume this was battery powered. So I need some help from you guy if possible on maybe finding an English manual, finding a power source, and then once its up and running possible helping troubleshoot the thing.

    All I know about it is that these are the names all over the machine, Kinda has what looks like a T-900 terminator on it. I believe my father got it between 1995-2000

    Toyotec
    Toyomaru
    Big Bomber
    BM-2

    Any help and advice would be much appreciated.
    Attached Images Attached Images

  2. The following 3 users say "Thanks" to Voska


  3. #2
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,080
    Thanks
    26,528
    Thanks Received
    12,100

    Default Re: new to forum, need asistance with Pachinko machine.

    ya have an older mordern pachinko there..

    it should have a transformer to provide the 24 volts.. they were never opperated on battery..

    please post a few good pics of the back.. most important the lower section..

    I had a machine in a similer frame..

    Toyotec DoraDora (2).jpgToyotec DoraDora back.jpg

    and of course

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  4. The following user says "Thanks" to Moparformances


  5. #3
    Tokie Owens Voska's Avatar
    Join Date
    Jul 2013
    Location
    Chicago IL
    Posts
    3
    Thanks
    0
    Thanks Received
    6

    Default Re: new to forum, need asistance with Pachinko machine.


  6. The following 3 users say "Thanks" to Voska


  7. #4
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,080
    Thanks
    26,528
    Thanks Received
    12,100

    Default Re: new to forum, need asistance with Pachinko machine.

    looks like the power cord got pulled off the transformer..

    if your lucky you can just solder a new coard on.. or your probably going to have to replace the transformer
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  8. The following 3 users say "Thanks" to Moparformances


  9. #5
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: new to forum, need asistance with Pachinko machine.

    Welcome to PachiTalk!
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

  10. #6
    Fever Hunter awassig's Avatar
    Join Date
    Mar 2012
    Location
    Houston
    Posts
    171
    Thanks
    93
    Thanks Received
    169

    Default Re: new to forum, need asistance with Pachinko machine.

    Welcome!
    Biohazard
    Enter the Matrix, Star Wars, Eva 6, Gladiator Evolution, Spiderman 3, Superman Returns, Planet of the Apes, The Mask, Indiana Jones.

  11. #7
    Eye Shooter p.opus's Avatar
    Join Date
    Apr 2013
    Location
    Coral Springs, Florida
    Posts
    734
    Thanks
    48
    Thanks Received
    725

    Default Re: new to forum, need asistance with Pachinko machine.

    Welcome to Pachitalk!!!

    Nice early modern there. If you can get it working, your dad will be pleased. To fully test the machine, you should have at least 300 balls. That will ensure you have enough in the jackpot hopper to test the shooter and to test out your payout functions.

    Once you get it working, then I would make sure I had enough balls to fully fill up the jackpot hopper and the upper front tray. (approx 800 balls). These early moderns really go through a lot of balls paying out during fever mode and you want to be able to keep up with the machine once it starts.

    Most people sell "broken" pachinkos when in reality 90% of the time they either have a simple ball jam, or not nearly enough balls to clear all the "interlocks".

    I just bought an 80's early modern from a guy close to me who got it from a friend of his with a total of 15 balls. He said he could never get it to work. I brought over about 300 balls and everything tested fine. If he had room for it, he probably wouldn't have sold it to me once he saw I had it working.

    So the good news is, if it powers up, you've got a good chance of getting it working. The bad news is if there is something electronically wrong...well then you have a piece of art.
    71 Nishijin "A" Bowling, 80's Nishijin Hit Parade , 05 Sankyo Star Wars, 07 Fuji Yamato 1, 09 Fuji Yamato 2
    ----------> ----------> ....And so it goes...

  12. The following user says "Thanks" to p.opus


  13. #8
    Tokie Owens Voska's Avatar
    Join Date
    Jul 2013
    Location
    Chicago IL
    Posts
    3
    Thanks
    0
    Thanks Received
    6

    Default Re: new to forum, need asistance with Pachinko machine.

    Ok any idea where to get said replacement transformer? And as for balls I got plenty of those things. not sure if its 300 or 800 but there are ALOT of them. I had to take a few of the back covers off of them to get at balls that somehow for around the mechanics of the machine.
    Last edited by Voska; 07-02-2013 at 11:14 PM.

  14. #9
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: new to forum, need asistance with Pachinko machine.

    check ebay or online 110 to 24volt 4amp transformer or higher for an earlier machine like that
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  15. #10
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,080
    Thanks
    26,528
    Thanks Received
    12,100

    Default Re: new to forum, need asistance with Pachinko machine.

    i have used these before.. so something like this (since there out of stock)

    24 vac Transformer 4 amp
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  16. #11
    Kungishi candyflip's Avatar
    Join Date
    Nov 2008
    Location
    MELBOURNE, Aus
    Posts
    1,831
    Thanks
    1,842
    Thanks Received
    4,811

    Default Re: new to forum, need asistance with Pachinko machine.

    Hiding behind that long ribbon cable on the back of your machine is a clear controller box.
    In white, printed on the front, is a whole lot of Japanese.
    That Japanese is your machine name - get a photo, and we'll be able to translate.

    WELCOME!
    There is always another machine around the corner...

  17. The following 4 users say "Thanks" to candyflip


  18. #12
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,575
    Thanks
    13,483
    Thanks Received
    18,890

    Default Re: new to forum, need asistance with Pachinko machine.

    the doctor is in

    Welcome Aboard




    ビッグボンバー2
    Big Bomber 2
    Ian #UKPachinko

  19. The following 4 users say "Thanks" to Drunkenclam


Similar Threads

  1. new to the forum...bought my first pachinko machine!
    By spagnoid in forum Modern Pachinko
    Replies: 10
    Last Post: 06-26-2010, 07:27 PM
  2. New to forum and Pachinko ... what machine is this?
    By alejandromadera in forum Modern Pachinko
    Replies: 14
    Last Post: 01-12-2010, 11:48 PM
  3. New to Pachislo and this forum, just acquired a machine
    By jasew503 in forum Pachislo Technical Support Tickets
    Replies: 11
    Last Post: 12-23-2009, 12:01 AM
  4. New vintage machine to the forum
    By turbov6 in forum Vintage Pachinko
    Replies: 15
    Last Post: 10-08-2006, 03:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •