Not really a problem, just looking for an answer. Toyotec Docker
Hi,
I am a newbie, and I've just restarted my interest in modern pachinkos. Yesterday I picked up a Toyotec (Toyomaru) Docker, and after a little bit of investigation, got it going. Somehow, the previous owner got a 0.5 mm larger ball bearing mixed up with the balls, and this "subversive" had jammed up the payout mechanism.
Anyway, on the back of the machine is a circuit board with jumper blocks. Each a different color. There are symbols next to each jumper, but I no longer have my Japanese dictionaries. Also on this board are many optocouplers. A ribbon cable from the board then goes to the main computer board. I believe that this is some sort of configuration device. But to configure what I do not know. The white connector seen in the upper right of the board.jpg picture is just a plastic shell, there are no contacts inside. The jumper underneath is black.
There is a diagram to the side left of the board, that explains something about the board. I can tell that it is saying something about applying 32VDC to the pins of the jumpers, that it drives the photocouplers (optocouplers). See the diagram.jpg picture.
Can anyone translate this diagram, tell me what the jumper blocks are for, or at least point me to a web site that would have the information, that I could put through an online translator?
Thank you very much
Reply With Quote
#UKPachinko
サメ
