Results 1 to 10 of 10

Thread: Issue with my CR Nadesico machine.

  1. #1
    Fever Hunter kurumilover2003's Avatar
    Join Date
    Oct 2011
    Location
    Lewisville, Texas
    Posts
    117
    Thanks
    151
    Thanks Received
    148

    Unhappy Issue with my CR Nadesico machine.

    Okay, it's been a good, long while since I last posted on this site, and I feel awful that it has to be about this, but if anyone can help me out, I feel it's you folks here haha.

    But I've run across a problem with my CR Martian Successor Nadesico machine (once again), and this time I can't figure it out for the life of me. There are no payout balls coming through (even though the top tray is full), and the frame lights are flashing yellow at the top, something I've never seen before, though I'm used to them flashing red in the same pattern whenever the top tray is empty.

    Every once in awhile, there will be a clicking sound coming from the back, and in that instance the frame lights will all come on like it's normal, but then it will automatically go back to flashing the yellow error lights. Like stated earlier, there aren't any payout balls coming out, so I figure this issue must come from something dealing with that area, but I honestly have no idea how to go about it or even pinpoint what the problem is.

    I'd appreciate any help you guys can offer, and thanks for taking the time to read c:
    -Jon

  2. #2
    Pachi Puro Ikaria's Avatar
    Join Date
    Jul 2008
    Location
    Jax, Fla.
    Posts
    3,281
    Thanks
    3,696
    Thanks Received
    5,112

    Default Re: Issue with my CR Nadesico machine.

    I don't have anything in this frame, so can't help you specifically.

    Like you said, it really seems like somethings blocking the payout or trackwork. The payout units are usually pretty easy to remove if it comes to that.

    I have found everything from oversize bearings to dart parts in machines.

    Check to see if you have an error code and post it.

    I'm sure someone will be along to offer more advise.
    Gotta catch 'em all Pa-chink-o

  3. #3
    Kungishi DrDark's Avatar
    Join Date
    Dec 2004
    Location
    Central NJ, Armpit of the Nation
    Posts
    1,222
    Thanks
    5,180
    Thanks Received
    1,569

    Default Re: Issue with my CR Nadesico machine.



    What he said!

    I think you have a problem somewhere in the reward/payout system. My money is on something foreign just before the payout motor.

  4. #4
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: Issue with my CR Nadesico machine.

    yep sounds like a jam..

    empty all the balls from the back ill bet ya find something strange..
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  5. #5
    Eye Shooter Chumsize's Avatar
    Join Date
    Aug 2012
    Location
    Gilroy, CA
    Posts
    887
    Thanks
    516
    Thanks Received
    1,785

    Default Re: Issue with my CR Nadesico machine.

    I don't have the exact frame, but my Eva 5 (which is a Bisty modified Sankyo Crystella? Frame) flashes yellow (and not red) whenever I let the lower bin fill during a payout. It won't go away until I clear it and then hit the error reset button next to the error indicator in back. See if you have an error # there too - it may be more specific as to where the jam is. But likely either some sort of junk got lodged in somewhere or a switch is busted/stuck.

    one thing is that It won't go away until you clear the error... i think... need something pointy to press the button, btw.
    Woof!

  6. #6
    Fever Hunter kurumilover2003's Avatar
    Join Date
    Oct 2011
    Location
    Lewisville, Texas
    Posts
    117
    Thanks
    151
    Thanks Received
    148

    Default Re: Issue with my CR Nadesico machine.

    Oh, geez. I ended up not using this site for nearly 4 years after posting this thread.
    Just to bring closure to this thread, you guys were correct: somehow, apparently a p a p e r c l i p had fallen into the back, and I'm assuming when I filled it with balls to play, it went down and got stuck, blocking all the balls. Had to take it apart around the motor, but got the clip out, angry and confused, and Nadesico works fine again.
    俺はデブの戦士、キューティージョニーさ!

  7. The following 3 users say "Thanks" to kurumilover2003


  8. #7
    Sandwich Shooter stampeed valkyrie's Avatar
    Join Date
    Feb 2015
    Location
    PA
    Posts
    450
    Thanks
    114
    Thanks Received
    598

    Default Re: Issue with my CR Nadesico machine.

    Good news..
    It took me awhile to locate this machine since its now an older one.. but I really like it.

    Now I need to locate the newer Nadesico Pachinko machine!

  9. #8
    Fever Hunter kurumilover2003's Avatar
    Join Date
    Oct 2011
    Location
    Lewisville, Texas
    Posts
    117
    Thanks
    151
    Thanks Received
    148

    Default Re: Issue with my CR Nadesico machine.

    Quote Originally Posted by stampeed valkyrie View Post
    Now I need to locate the newer Nadesico Pachinko machine!
    Wait, there's a newer one?? * o * I have to look into this! Do you happen to have any links?

    EDIT: Nevermind, I just found almost immediately. I cannot believe I haven't heard about this one until now, wow.
    Kinda miss the ship being on top. When they use the Gravity Blast, those animatronics were great
    Last edited by kurumilover2003; 05-22-2017 at 05:54 PM.
    俺はデブの戦士、キューティージョニーさ!

  10. #9
    Sandwich Shooter stampeed valkyrie's Avatar
    Join Date
    Feb 2015
    Location
    PA
    Posts
    450
    Thanks
    114
    Thanks Received
    598

    Default Re: Issue with my CR Nadesico machine.

    With the new machine.. it changes from the TV series to Prince of Darkness and when it does the whole theme and color layout changes... its pretty neat.

  11. The following 4 users say "Thanks" to stampeed valkyrie


  12. #10
    Fever Hunter alucard7x7's Avatar
    Join Date
    Jan 2016
    Location
    Utah
    Posts
    169
    Thanks
    111
    Thanks Received
    207

    Default Re: Issue with my CR Nadesico machine.

    The new nadeisco machine is pretty sweet. I almost pulled the trigger on one a couple times, but I've never seen any of the series. It has one heck of a light show though!
    Pachi Fever!

Similar Threads

  1. Issue with a pachislo machine. Please Help
    By michael382 in forum Pachislo Technical Support Tickets
    Replies: 2
    Last Post: 09-26-2012, 02:15 PM
  2. Problem with Sankyo Nadesico Pachinko :s
    By kurumilover2003 in forum Pachinko Technical Support Tickets
    Replies: 6
    Last Post: 10-30-2011, 09:27 PM
  3. An unsual issue with a old pachinko machine
    By Norrec in forum Vintage Pachinko
    Replies: 20
    Last Post: 08-12-2011, 09:27 PM
  4. Replies: 11
    Last Post: 10-23-2009, 02:38 PM
  5. Laminate issue on Star Wars machine
    By superpachinko in forum Pachinko Modifications
    Replies: 9
    Last Post: 06-14-2006, 06:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •