Power Dream 7

[krayzeegit]

Ok so I bought two Pachislo's (is that the correct plural?) over the weekend, a Sammy Fire Drift & a Takasago Dream 7. With this forum's help I've managed to get the Fire Drift working and it's brilliant. The Dream 7 came with a 110 volt transformer tucked away inside the cabinet the end of which is no longer attached to the machine. I'm assuming that the transformer sat inside the cabinet with it's lead pocking out the back and the output from the transformer plugged into the machine ... I just can't locate where ? anyone point me in the right direction please ?20130507_121134.jpg Pic 1 is the transformer. Pic 2 is the plug from the transformer. 20130507_121043.jpg I thought it might plug into this plug an a circuit board top right but the plug is 3 pin and the socket is four . 20130507_121333.jpg

[Drunkenclam]

I think that's the reel stop board. The main PSU is normally locate next to the token hopper. In the back of the machine. See if there is anything on the silver or black box next to the hopper.

[krayzeegit]

Finally found it and the Dream 7 powered up perfectly. The only issue was a sticking coin slot which was cured with a little wd40. Now just need to source a key to reset the machine with. Really pleased.