I just plugged in my Biohazard Pahcislo... now what?

[The Rube]

I plugged it in but only shows the main menu. How do I switch it so I can actually play the machine?

[takethecastle57]

Could you please post a photo of the screen so I know if you just need to set the odds or something else .

[takethecastle57]

Ok , I just fired up my Biohazard after having unplugged for 11 months and had to turn off the inside master power switch and rotate the set key to the right (clockwise ) . Turn back on the master power switch and on the inside the front door is the odds set button on the right side of the LED display that shows C . Push the odds set button till you get the number you want ( 1 : very low payout and 6 : many token payout ) once you get thenumber you want hold down the outside start reel knob for a slow 4 count . Then rotate the set key to the left (counterclockwise ) . I had to turn the master power off inside the machine and then back on and now all is ready to play . Be careful , the volume can be Very lound before you adjust it to a proper level

[The Rube]

will do, just waiting for the pic to get sent from my cell. I can turn it on but only go to the main menu screen. I can toggle the menu and select stuff (haven't changed any of the settings) but can't seem to start the machine so I can play it. Also the the lower marquee lights are not on. is there a fuse to be checked or do I just need to change out the bulbs. if so how do I change out the bulbs?

[takethecastle57]

Is your machine Yapping at you in Japanese ? just follow the sequence that I posted and it should be ready to be played

[The Rube]

Thanks for the help. I got it working and it plays great... But does anyone have any translations to the menu screen? Just curious how any of those options affects gameplay?

[Wayne-Ooo]

Also the the lower marquee lights are not on. is there a fuse to be checked or do I just need to change out the bulbs. if so how do I change out the bulbs?

When you reset the machine, as takethecastle57 meantioned, the belly light should come back on.

[takethecastle57]

http://www.pachitalk.com/forums/sear...earchid=810540

[The Rube]

Now it's off to ikea. I measured this out and should be able to lay this longways and fit 3 pachislo machines nicely on top.
EXPEDIT Shelving unit - high gloss gray - IKEA

[takethecastle57]

Cool I'm glad to help and .,.,.,.,.,.,.,.,.,., to the site that Never Closes

[Card Shark]

Now it's off to ikea. I measured this out and should be able to lay this longways and fit 3 pachislo machines nicely on top.
EXPEDIT Shelving unit - high gloss gray - IKEA

That looks like a great idea for a stand. I would love to see a picture of how it turns out when you get it set up.

[The Rube]

I took some measurements and it should be able to hold 3 pachislo machines very nicely. I just wonder if I can find 3 stools that will work with it.

[The Rube]

it did. thank god. I'm good with taking things apart but not always when putting things back together.

[Card Shark]

This is a thread where another member worked on translating a lot of the story line for your machine

http://www.pachitalk.com/forums/mode...anslation.html

[Chumsize]

My personal stool preference? firm! hahah! no actually: Deluxe Padded Keyboard Bench - SXBN : Target

Cheap & comfortable enough to sit on for a while. Plus they take up very little room, esp closed and stored.

[The Rube]

Those should work out great. How thin do they fold up to?

My personal stool preference? firm! hahah! no actually: Deluxe Padded Keyboard Bench - SXBN : Target

Cheap & comfortable enough to sit on for a while. Plus they take up very little room, esp closed and stored.

[Chumsize]

a bit thicker than the seat... i dunno... 5-6 inches? The legs fold up under the pad.