New to the community & I need help with my Seamaster slot machine please!

[woundedwarrior]

I got a Seamaster slot machine for my wounded warrior hubby to assist during his recovery. When I purchased it, the gentleman said it worked fine and it just needed to be reset every now and then. We used it twice before we starting having issues. It turns on fine and lights up when its turned on. But it keeps displaying EO on the Pay Out and makes like a carnival music noise over and over again. Does anyone know how to fix it? We have done the reset but it always goes back to the error code. We can change the play level on it like the manual says and the coin holder will rotate when the button is pushed. It seems like we are missing something really simply. Any ideas please?

[hanabi]

Hello

Welcome to PachiTalk, I have moved your thread to the Pachislo tech support area of the Forums for you

Most errors are usually remedied with a full reset, so just to double check that you are carrying out the complete hard reset

Here is some info that explains how to reset a pachislo, as part of this process it includes how to change and set the skill level, you must follow all steps carefully

"How To Set the Skill Levels of Your Pachislo
HOW CHANGE ODDS:

"TURN YOUR MACHINE OFF FIRST"

1. Locate internal key switch, and insert key.
Note: In order to change odds, machine must be in idle mode with no tokens/coins or credits being played and off.

2. Turn "reset" key switch to on, to access programming mode.

3. Turn on machine now.

4. Depending on machine type, a number from 1 to 6 will be displayed on one of the LED meters on front door. (please note on some models the numbers could be displayed inside the machine)

5. Locate and push Skill button. Depress button and notice movement of number being displayed in LED meter.

6. Once desired level is displayed (1 to 6), push down on play handle (Joy Stick) for 10 seconds, and depress both "BET CREDITS" and "COLLECT CREDITS" buttons to lock odds level into machine memory.

7. Turn "reset" key back to off.

8. Machine should immediately initialize. If not, turn power switch to the OFF position, wait 15 seconds and turn power switch back to ON position.


Also just to confirm some additional info (from member Chrisdice) regarding hard reset

Two switches on the power supply:
- One requires a soft reset at the end of a bonus.
- The other pays out all tokens at the end of a bonus.

For these switches in most cases off is in the down or right position. The for off and on are:

無 = off

有 = on



Do let us know if this helps at all or if you require any further advice





Ang

[tommy4132]

E0 is a token slot jam. Make sure the tokens are going in and coming out, if they are it might need to be cleaned. Check inside the door where the tokens come in and make sure that is clear, if that looks good the token hopper can be taken out by just unplugging the harness and sliding it out. Remove all the tokens and make sure everything is clean in there. When you are all done, put everything back and do a reset.

[Moparformances]

looks like ya got some answers...

please let us know if that does or does not work for ya??

and of course


Welcome to Pachitalk

[Card Shark]

​Welcome to PachiTalk!

[pachiwall]

Sorry, but I can't be much help on pachislo problems. If you ever have a vintage pachinko problem...I might be useful.
Not sure what branch of the service your hubby is in, but I wish to extend my deepest gratitude for his service!
And...to Pachitalk!