Macross Fever right arm

[sppt76]

It has been awhile since i started up my Macross Fever, and not sure if this is a problem or not. When I turn on the machine the center body comes down and the left arm moves to center; but the right stays in place. Is it suppose to do that?

[portercbl]

It has been awhile since i started up my Macross Fever, and not sure if this is a problem or not. When I turn on the machine the center body comes down and the left arm moves to center; but the right stays in place. Is it suppose to do that?

When I start up my Macross, three parts of the robot move to the center of the screen, the body drops from the top, and one arm from the left side moves to the center and the right arm moves to the center while turning the silver gun. then everything retracts and you see the whole rectangular screen. I hope this helps.

Jerry

[jodini]

http://www.youtube.com/watch?v=mvZ7x9mkhDA

[sppt76]

that was what I was afraid of, the right arm is stuck

[sppt76]

it looks like the gear and the track do not mesh correctly. looks like i am going to have to take the cell apart to fix it. this will not be fun

[Card Shark]

Good luck, I am sure you will get it fixed.

[DrDark]

Please let us know how you fixed it ... when you get there.

[sppt76]

Well i got it fixed. There is two gears at the bottom of the arm assembly. Under that there is a track in which the gears move the piece back and forth. Well the piece that sits in the track has a set of teeth, which meshes with the gears. Some how that piece popped out of the track, so the gears had nothing to move. All I had to do was pop it back into the track. Sorry no photos, my camera battery is dead. If you want some let me know and I will post some.

[Card Shark]

Congratulations!! Glad you got it working properly.