Need Nishijin Model B loader part

[gamester]

Hello from a long time pinballer. I am restoring a model B, and I am in need of the ball loader behind the lower front door. I have a rental home next door where I installed a similar unit in the wall of the living room... tenants love it. Hopefully someone will have one of these for less than the price quoted by a retailer ~$50...
I could also use a new plastic face as there is a break in the front plexi.

Thanks
Erik

[mxfaiman]

to Pachitalk Erik

I see your missing the whole loader for the front panel. I unfortunately don't have one that I can sell to you.

As for the plexi you can go to a local plastic shop and give them the measurements and have them cut you a piece. Or some members go to home depot or lowes and get a piece of glass cut. The glass is usually around $5 (so I have heard) and the plexi will probably be around $10-15. It is all preference just make sure which ever you pick you get 1/8" thick.

If you have any other questions feel free to ask. And once again welcome to PT.

-Max

[Moparformances]

i have a whole tray.. shoot me a PM in your interested.. i know that the part your missing has a few variations.. this way your geting the whole thing

let me know

P1060163 (800x600).jpgP1060164 (800x600).jpgP1060165 (800x600).jpgP1060166 (800x600).jpg

[Moparformances]

opps me and my manners

Welcome to Pachitalk

[mxfaiman]

i have a whole tray.. shoot me a PM in your interested.. i know that the part your missing has a few variations.. this way your geting the whole thing

let me know

That won't work. That is a 72 year tray and he has a 75 year machine. So the loader doesn't have the counter weight arm. Instead it has the arm with the spring attached.

Sent from my Nexus 7 using Tapatalk HD

[naha13]

I have a model B loader that should work. It's not as clean as I would like, but it's definitely functional. Shoot me a PM