Need Daiichi payout/timing motor cam...

[Chumsize]

So I picked up a nice old dejipachi (Daichi "Escape") but the cam off the timing motor was missing. I've managed to rig together something temporary using an old Fisher Technik wheel, but it's a best guess and can end up jamming pretty often (resulting in a screeching E2 error). Anyway, if you have one laying around (yes, unlikely) PM me or something... OR... if you have one of these frames and are comfortable digging the thing out, sending a picture and some dimensions, I could at least try to slap something better together... Pics... front o machine, lower back (red square is area of timing motor).

$(KGrHqJHJBQFDs+3heDLBQ8)8QYobg~~60_57.jpg $T2eC16VHJHQE9nzEymKVBQ8)8F5,,g~~60_57.jpg

thanks!

[Chumsize]

After a few tries I was able to get something to work... has gone about 100 payouts with only one instance of needing a little help to clear the ball out of the area.
Basically, I bought a bunch of acrylic plastic disks from Tap Plastics and routed ball-sized notches out of the sides. A 3/4" disc with 4 notches worked best. Then I needed to cant the motor back and to the left a bit (yes... back and to the left.. back... and to the left... back and to the left... back... and to... the left... back...) for the best result. Not exactly perfect, but close... and made a useless machine playable again. Hooray for Tap Plastics, Dremels, and cyanocrylate!