Results 1 to 7 of 7

Thread: What do i need to power this thing up?

  1. #1
    Tokie Owens TucsonDirect's Avatar
    Join Date
    Oct 2012
    Location
    Tucson
    Posts
    3
    Thanks
    0
    Thanks Received
    1

    Default What do i need to power this thing up?

    I just got ahold of a
    Sankyo
    Stellar
    New Model 2000 Version
    "High Grade"
    "7&15"
    Pachinko Machine
    i believe the Unit was built in 1994
    So here is my question

    I have no power plug for this unit. What does it operate on?
    Does it use 110v AC does the Ac cord need a 24v AC transformer before going to the machine?
    Guy i got it from said just attach a lamp cord to the two red cords on the back... I did that and got all sorts of sparks??? Blew a small ceramic disk capacitor on the board that is located under the clear plastic cover, i went to radio shack and got what i think is a proper replacement and soldered it in.


    can someone point me in the right direction???

  2. #2
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: What do i need to power this thing up?

    a 24v ac transformer is needed, I hope you didn't fry anything else
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  3. The following user says "Thanks" to luckydog


  4. #3
    Tokie Owens TucsonDirect's Avatar
    Join Date
    Oct 2012
    Location
    Tucson
    Posts
    3
    Thanks
    0
    Thanks Received
    1

    Default Re: What do i need to power this thing up?

    Me too its apparently a "Fever Girl" Themed machine, i the overhead lights come on, and the launch motor will kick out balls but, i cant get any of the spinners or the screen to come on.

    Does anyone have any advanced information?
    There is also no sound, or Board lights coming on

  5. #4
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,611
    Thanks
    13,503
    Thanks Received
    18,924

    Default Re: What do i need to power this thing up?

    Pictures pictures pictures. Please post a good clear picture of front and back of the machine


    You wouldn't get any sound till a ball drops in the start pocket.


    If you got it connected to a 24vac transformer rated at about 5A or higher. Start with basic tests.




    Fill the back top tank with about 200 balls. Open the glass and drop a ball into the start pocket under the screen. Do you get any balls payed out to the front tray. Or. Any lights or sounds from the frame.


    You already said the shooter works.


    Also with the power disconnected at the wall socket. Trace the power going into the machine, follow the path of the circuit boarded and leads to see if there are any fuses blown. You might have to unscrew some to get a proper view. Also check out this thread


    Question About New Pachinko Machine Voltage



    And hope nothing else is damaged. Remember electricity can be dangerous so safety first



    Ian #UKPachinko

  6. The following 2 users say "Thanks" to Drunkenclam


  7. #5
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,086
    Thanks
    26,534
    Thanks Received
    12,119

    Default Re: What do i need to power this thing up?

    Welcome to Pachitalk

    good luck
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  8. #6
    Kungishi DrDark's Avatar
    Join Date
    Dec 2004
    Location
    Central NJ, Armpit of the Nation
    Posts
    1,222
    Thanks
    5,180
    Thanks Received
    1,569

    Default Re: What do i need to power this thing up?

    !!! WELCOME !!!

    Don't let the magic smoke out!

  9. #7
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: What do i need to power this thing up?

    Welcome to Pachitalk!

    Looking forward to seeing some pictures.

    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

Similar Threads

  1. How to Power a Power Flash / Circuit Racer Machine
    By Moparformances in forum Vintage Pachinko
    Replies: 2
    Last Post: 06-19-2011, 08:53 PM
  2. Power Flush power flash
    By who922 in forum Vintage Pachinko
    Replies: 21
    Last Post: 07-12-2010, 11:12 PM
  3. power to a power flash question
    By Moparformances in forum Vintage Pachinko
    Replies: 2
    Last Post: 11-11-2009, 11:25 AM
  4. I think I just did a bad thing...
    By Pinwizkid in forum eBay - General Auction listings
    Replies: 9
    Last Post: 07-05-2006, 12:32 AM
  5. help me fix this thing up
    By someguy13090 in forum Vintage Pachinko
    Replies: 15
    Last Post: 07-03-2006, 01:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •