Sankyo Big Slot machine

[rumpleteazer]

I just purchased a Sankyo Big Slot pachinko machine. This things is in great shape over all, and it's my first machine.

I tested it out and I can get the ball feeder to work, lights lights up, and the sounds all work.

The only problem is it wont stop beeping! I've tried all the different switches, but I wont lie, I have no clue what they do.
There is a small led panel on the back that reads..."5". I assume this is an error code, but I can't find anything online.


Any help would be much appreciated! And sorry if this is the wrong section guys, I only posted here because I've seen past help threads in this section.

[hanabi]

Hello

Welcome to PachiTalk!!

Congrats on your first Pachinko!!

I was trying to find some info on your model, i'll keep looking, but in the meantime here is a link to a general Sankyo manual

PachiTalk Research Center - Machine Manuals - Sankyo General - PachiTalk

It may or may not be the same type frame exactly as yours, but it is the same manufacturer and it will help you with identifying parts and names and give you the general idea

Looking at that guide towards the end, some error codes are shown, please bear in mind that sometimes these numbers refer to different things depending on which game and / manufacturer,

This guide is showing an E5 to relate to the dongle area of the pachinko, I'm presuming yours is a CR pachinko and requires a dongle, most pachinkos that make it to the west are CR models (you can usually tell by if it has 2 buttons on the front tray)

Take a look at the back of your machine and usually about half way down to the right there is often something plugged in that looks like often looks like an old printer plug thingy, if you see it and can easily remove it and then reseat it, maybe jiggle it about and that may help, these are prone to get knocked in transit.

Let us know if this helps at all

[yodakat]

I've got a Big Slot and can help with a few of the error codes.
8. bottom overflow tray is full
7. top tray, payout, is out of balls
3. no dongle (flashing red & green lights top left of door, constant beeping)
that's all i've figured out so far, here's a couple of pics of the error codes if anyone can help translate them.
now i have a question for you, on the lower front there is stop start stop pockets, my left stop has a sensor in it, start has a sensor in it,
but the right stop does not have a sensor in it. does yours have a sensor in the right side? If I can be any more help just let me know.
DSCN0238.jpgDSCN0239.jpg

[Card Shark]

Welcome to Pachitalk!