New machine with e6 error and not reset key

**skynetbroadband** · 08-15-2012, 10:43 AM

morning everyone. I just received a new machine and for the life of me cannot figure out how to reset my error message so that I can play it. The hopper was jammed so I took it apart and fixed it. I still have an e6 error that I am currently unable to reset do to the person having it before me broke the reset key inside the lock and pulled the lock out. What wire and or wires do I have to short to reset it? do I have to pull out the power supply board? I attached some pics. Please any info would be great as to how to reset in my situation. I have 3 other machines and all working great and the kids love them. Thanks, Rob

**yose** · 08-15-2012, 12:37 PM

Are the wires still hooked to the key switch.Maybe you could use needle nose pliers and twist the broken key to reset.Just trace the wires at the back of the switch and you will know the ones to use.

**skynetbroadband** · 08-15-2012, 01:17 PM

the whole key mechanism is gone. no cylinder or anything. cant see any spare wires that would connect to the once present reset lock and cylinder. Thanks, Rob...dont know where the key switch would be and or used to be. Don't know where it would be connect to the power board

**skynetbroadband** · 08-15-2012, 05:56 PM

here is what I have going on. I attached 2 pics to give everyone and anyone a better insight on my issue. I was wondering where the RED 2 prong lead on the coverboard was where the lock and key mech was attached to? if so I will connect it and get a toggle switch. ThanksResampled952012-08-159517-37-259524.jpg Resampled952012-08-159517-40-0095816.jpg

**luckydog** · 08-15-2012, 06:07 PM

have you tried a soft reset by turning door key to the left??

**skynetbroadband** · 08-15-2012, 06:21 PM

yes

**skynetbroadband** · 08-15-2012, 08:00 PM

well i fixed the reset problem. it was that red 2 lead. put a toggle switch on it! works. but now every time I put a token in it goes straight to the payout tray. like its rejecting them. Yes I have cleaned the sensors . don't know what else to try. any input would be great. Thanks