Bond 007 stuck

[Max Bet]

Hi everyone,

I have a James Bond 007 by Takasago that is stuck in open relay mode. Resetting the machine doesn't help. When machine is turned on, siren goes off and doesn't stop. Turning key to program quiets it up but when back in play mode, coin accepter relay does not close at all. I unplugged everything and plugged it back in and still nothing. Took coin accepter apart, cleaned & lubed it and nothing. Any ideas would be great.

Thanks in advance.

[Max Bet]

Why was this thread moved?

[hanabi]

Why was this thread moved?

because I felt it was a technical query / problem, rather then a thread discussing the model in general

and I felt you would get a quicker response through our tech support tickets, which i know our Members are likely to check first to offer assistance

[Max Bet]

[QUOTE=hanabi;460192]because I felt it was a technical query / problem, rather then a thread discussing the model in general

and I felt you would get a quicker response through our tech support tickets, which i know our Members are likely to check first to offer assistance



Ah, thank you. Still trying to navigate around this site.

[Wayne-Ooo]

I really don't know what you mean by "open relay mode". If the coin mechanism is not closing, it sounds like you are stuck in "reset mode". You may have to replace the reset switch. You can test it by disconnecting the switch and putting the wires together, for normal play and apart for for reset mode.

If possible, a short video of your problem would help.

[stevegroves]

Hi There,

Not sure if you are still having the issue with your machine, but it is very similar to the issue I just resolved with a Cr code and alarm. Try removing the Token Accepter and clean out any fluff and clean the sensor this worked for me.

Cheers