okumara yuki help

[mxfaiman]

I'm trying to piece together my okumara yuki. However I have no clue which ball loader goes to it. I bought it disassembled but I have a whole bin of ball loaders and I can't tell which is the correct one. I wish I could just line it up on the panel or the playfield but neither will work. As the panel has no mounts and the playfield is missing. Below is the machine if someone has a similar one can you just post a pic of the ball loader.

[mxfaiman]

Well I think I found the right loader for the machine. Too bad if it isn't the right one because it looks like it will work with no issues.

[CarlW]

Hi Max,
I had one similar to that and converted it to cyclic. It is at a friend's house.

Seems like you answered your own question though?

Let me know if you need a picture behind the shooting tray...

Cyclic FRONT 1.jpg

[mxfaiman]

Hi Max,
I had one similar to that and converted it to cyclic. It is at a friend's house.

Seems like you answered your own question though?

Let me know if you need a picture behind the shooting tray...

If you could get one that would be great though don't go through a big hassle. I think I have the right one. Really basic only has the see-saw and the flag to stop balls. Odd it has no lever to push them up to the shooter, because the see-saw stops there and just dumps the ball out.

[yodakat]

Here you go, hope it saves another life...DSCN0129.jpgDSCN0130.jpgDSCN0131.jpgDSCN0134.jpgDSCN0135.jpgDSCN0136.jpgDSCN0138.jpgDSCN0139.jpgand by chance if you have one with green ribbed back I could use a picture of the jackpot and linkage I've repaired mine and got it working but correct linkage would help.

[mxfaiman]

Here you go, hope it saves another life...and by chance if you have one with green ribbed back I could use a picture of the jackpot and linkage I've repaired mine and got it working but correct linkage would help.

Thank you for those pictures. Actually can you also take a shot of the whole back for me?

My JP mech won't help much as it is also kind in pieces and it is broken. But I'll post the pic of the back if it can help.

020.jpg1021.jpg

[yodakat]

Do you have the other parts to the JP ? you could epoxy it back together. If not and you want to part with it what I need is intact the piece where the wire is hanging from and the wire, here are some back pics i've collected while working on mine trying to figure out the JP. I'll take some pics of my back tomorrow for you.back-.jpgback--.jpgback-1.jpgback-2.jpgDSC03073.jpg

[mxfaiman]

Do you have the other parts to the JP ? you could epoxy it back together. If not and you want to part with it what I need is intact the piece where the wire is hanging from and the wire, here are some back pics i've collected while working on mine trying to figure out the JP. I'll take some pics of my back tomorrow for you.

Thank you for those pictures.

Sadly I don't have the part to my jackpot mech. However I do have other rod so I plan on fixing it. As I am going to save this machine from being parted out.

[yodakat]

Ok,, glad to hear another life to be saved for future fun. Here's pics of my back and some close ups of my JP, epoxy and curtian hooks come in handy. The biggest problem was getting the metal connecting rod the right shape and length.DSCN0140.jpgDSCN0143.jpgDSCN0145.jpgDSCN0146.jpgDSCN0147.jpgDSCN0148.jpg

[mxfaiman]

Ok,, glad to hear another life to be saved for future fun. Here's pics of my back and some close ups of my JP, epoxy and curtian hooks come in handy. The biggest problem was getting the metal connecting rod the right shape and length.

Looks Good.

I see that you need an upper tray. Or is it just off for those pics.

[yodakat]

Yep that I don't have, been looking but they are few and far between, could use a couple of them of any brand. Seems like they get broken and people remove them and never put them back, like JP covers, lower track covers, seesaw covers, and they wonder why they can't get it to work... I just started redoing a Model A that was the worst one i've come across everything was covered in heavy rust, dirt, spiders, other assorted critters, old Doral pack wedged in to keep out of balls flag from tripping, blew it out, guick reset, through in some old balls works perfect. I haven't found one yet that flat out will not function, a couple of small repairs and their up and running.