Missing Part for Sanyo Comet II

[brandonevans428]

I am missing what appears to be a big bright orange piece for the back of my Sanyo Comet II. Looks like that when you get a jackpot and the machine pays out, it drops and goes through a tube/pathway to hit the ball on flow onto the front tray. Without it, when the machine pays out or I take the balls out, it just shoots out the back making a mess. Any replacement parts would be greatly appreciated or a way to cover it up. Will upload picture soon thanks

[brandonevans428]

Here is the missing part for the back. I have since removed the aluminum foil, as it isn't that quite appealing to the eye That general area is suppose to have a piece that connects at the top where there is an opening, and down below where the foil is.

[Moparformances]

it may not look the best but i would make a cover for it..

get yourself a piece of plexi and a torch.. low heat and time ya should be able to make something that will work for ya

[yodakat]

Here's a picture of the part you need, hope this helps
img_8546.jpg

[brandonevans428]

Yea thats perfect. Now all I need to do is find a replacement piece or make one myself. For now I will temporarily make my own. Same goes for my other post with the missing front over flow lever.

[Moparformances]

Here's a picture of the part you need, hope this helps

Welcome to Pachitalk

[Card Shark]

Here's a picture of the part you need, hope this helps
img_8546.jpg

​Welcome to Pachitalk!

[brandonevans428]

If anyone has that orange piece for the back of the Sanyo Comet II it would be greatly apreciated. Same goes for the front overflow tray lever. I ran a screw through it to serve as a temporary lever but I'd like this machine to be complete.