Results 1 to 7 of 7

Thread: Need assistance ID'ing a machine.

  1. #1
    Tokie Owens VegasResident's Avatar
    Join Date
    Jan 2012
    Location
    Las Vegas
    Posts
    1
    Thanks
    0
    Thanks Received
    4

    Default Need assistance ID'ing a machine.

    Hello Everyone. I got this machine quite a few years ago at a garage sale. It sat in the garage until I found it again behind a piece of furniture I moved. I know it's a Nishijin Super DX and it says Sophia on the back other than that I have no clue. Can someone tell me if all the parts are there? I read some of the posts about powering it and found a wall wart for a CD cleaner that didn't work, will it work? Of course I will have to get some balls first before I get to the powering up point. It only came with a few and those have been lost over the years. I read on another post about using stickers to get some sense of age but this one doesn't have any. Thanks in advance for any help.

    Angel 002.jpgIMG_1171.jpgIMG_1153.jpgIMG_1156.jpgIMG_1170.jpg

  2. The following 4 users say "Thanks" to VegasResident


  3. #2
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: Need assistance ID'ing a machine.

    Welcome to Pachitalk!
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

  4. #3
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    38,486
    Thanks
    68,076
    Thanks Received
    45,091

    Smile Re: Need assistance ID'ing a machine.

    WELCOME!!!
    Last edited by MrGneiss; 06-17-2012 at 05:57 AM.

    "Blowing smoke rings at the moon."

  5. #4
    Pachi Puro mxfaiman's Avatar
    Join Date
    Jan 2011
    Location
    Jasper, IN
    Posts
    6,947
    Thanks
    8,348
    Thanks Received
    6,860

    Default

    to Pachitalk!

    Sorry I can't see the first 3 pics from this mobile app. But looks like you have about a 1973 Nishijin model B. Looks like a few parts on the back are missing. I'll tell you what and the teme of the machine later today.

    Also the wall wart should work as long as it is putting out under 10v. Ac or dc doesn't matter. Though the bulbs might be burnt out and the fuse could be blown. But those are cheap components.

    And once again welcome to PT.

    -Max

    posted using Tapatalk

    100 machines and counting...

  6. #5
    Pachi Puro naha13's Avatar
    Join Date
    Jan 2011
    Location
    Arizona
    Posts
    4,230
    Thanks
    3,427
    Thanks Received
    2,895

    Default Re: Need assistance ID'ing a machine.

    The ball track cover is missing on the back. That piece keeps the balls from stacking up and falling on the floor just above the large white circular payout section. Other members here might have one for sale or be able to make a reproduction for you!
    Pachinko -Nishijin "C" Fishing Game & Hockey, Red Lions, CR Red Lions, Heiwa Double Wing, Takao Bruce Lee, SanseiR&D 777 Sevens Rock, Sankyo Wanted!, lots of other vintages!; Pachislo -SPIN LUCK, Kung Fu Lady, Gamera High Grade, Gundam

  7. #6
    Scowlin' Jean Hornigold hanabi's Avatar
    Join Date
    Jun 2006
    Location
    at the 'Seaside' (UK)
    Posts
    27,340
    Thanks
    51,525
    Thanks Received
    30,715

    Default Re: Need assistance ID'ing a machine.

    Hi there

    Welcome to PachiTalk!!



    Angie ...
    Pachinkos, Pachislos, Coffee, Papercraft Ninja, Pinball

    I ran away with the Steampunk Circus!
    I was hiding in a room in my mind...
    You crush the lily in my soul...



  8. #7
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,080
    Thanks
    26,528
    Thanks Received
    12,100

    Default Re: Need assistance ID'ing a machine.

    your missing a few parts form the back but nothing that cant be made..

    looks like all the important parts are there.. your leif switches are going to need some cleaning and adjustments before the lights will work right.. the wallwart ya have will work great..

    I dont see the gaming sticker that would say the date but i would agree with Max.. 73 looks about right..

    and of course

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  9. The following user says "Thanks" to Moparformances


Similar Threads

  1. Assistance req from any computer geeks
    By Drunkenclam in forum These are the days of our lives...
    Replies: 19
    Last Post: 05-07-2012, 03:52 PM
  2. help ID'ing an old machine
    By larryn2o in forum Vintage Pachinko
    Replies: 7
    Last Post: 10-11-2009, 06:28 PM
  3. Nishijin "Funky-7" modern machine ID assistance
    By Matt79 in forum Modern Pachinko
    Replies: 3
    Last Post: 09-02-2009, 12:15 AM
  4. Assistance Please
    By Merryoakparker in forum Vintage Pachinko
    Replies: 16
    Last Post: 05-25-2007, 10:47 PM
  5. Need Leds or Assistance
    By Eddie in forum Pachislo Modifications
    Replies: 13
    Last Post: 05-02-2006, 03:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •