Results 1 to 7 of 7

Thread: Help identify and what is it worth?

  1. #1
    Blind Shooter alancurry's Avatar
    Join Date
    Mar 2012
    Location
    Cedar Park, TX
    Posts
    79
    Thanks
    110
    Thanks Received
    205

    Default Help identify and what is it worth?

    Is this a single ball conversion and if so, what would it be worth?

    Thanks,

    Alan

    4-2012 007.jpg

  2. The following user says "Thanks" to alancurry


  3. #2
    be vewy vewy quiet im hunting pachis... Lt Teddy's Avatar
    Join Date
    Jun 2009
    Location
    Walla Walla , Wa.
    Posts
    1,385
    Thanks
    1,863
    Thanks Received
    2,148

    Default Re: Help identify and what is it worth?

    You really should know it is worth what is worth to you. A picture of the backside along with a lot closer look at the center for water stains would probably get you alot of different figures. Seeing as how it is a conversion without seeing the back I would in my OPINION and I do not collect single ball machines, guess in the neighberhood of fifty dollars. Some will pay alot more and some will say it is not worth anything for them.
    Over the hills and threw the woods, pachi hunting we go.
    Arrangeball Hunter
    ARRANGEBALLS 5, Slots 12

  4. The following 4 users say "Thanks" to Lt Teddy


  5. #3
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,080
    Thanks
    26,528
    Thanks Received
    12,100

    Default Re: Help identify and what is it worth?

    50 to 60 if its all there and in nice shape.. much much less if its water stained and or missing parts
    ______________________________________________________
    jsut an fyi.. on that machine all winning balls are paid to the bottom tray and have to be lifted by hand to the shooter tray
    Last edited by Moparformances; 05-04-2012 at 05:15 PM. Reason: Automerged Doublepost
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  6. The following 4 users say "Thanks" to Moparformances


  7. #4
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,235
    Thanks
    4,680
    Thanks Received
    4,663

    Default Re: Help identify and what is it worth?

    I can see that it is missing a low ball stop. This version probably only used on conversions.DSCF6399.JPG Below the left green pocket is a small metal gate it is up in this pic, I can't find a good pic without taking one specifically of it. DSCF6411.JPG This is the lever that opens and closes it.DSCF6403.jpgNot a good pic, but the wire from the lever goes up to a wire linkage coming off the low ball pressure plate in the metal trough below the ball hopper. When balls are low, it lifts the wire, closing the gate preventing balls from entering the playfield. It don't prevent balls from being shot...they just hit the gate and fall back into the lower tray. Iwanted a sbc pretty bad, so I bought the 1st one I saw for $100, later I got another for $50.

  8. The following user says "Thanks" to pachiwall


  9. #5
    Pachi Puro mxfaiman's Avatar
    Join Date
    Jan 2011
    Location
    Jasper, IN
    Posts
    6,947
    Thanks
    8,348
    Thanks Received
    6,860

    Default Re: Help identify and what is it worth?

    Pictures of the back are a must.

    But based on what I see on the front I'd say the $50-60 range sounds about right. Though if anything is missing off the back you would have to consider that price to drop.

    100 machines and counting...

  10. The following 2 users say "Thanks" to mxfaiman


  11. #6
    Blind Shooter alancurry's Avatar
    Join Date
    Mar 2012
    Location
    Cedar Park, TX
    Posts
    79
    Thanks
    110
    Thanks Received
    205

    Default Re: Help identify and what is it worth?

    Thanks everyone for the replies. I've posted the Craigslist ad here: http://www.pachitalk.com/forums/show...547#post448547

    Alan

  12. The following 2 users say "Thanks" to alancurry


  13. #7
    Pachi Puro mxfaiman's Avatar
    Join Date
    Jan 2011
    Location
    Jasper, IN
    Posts
    6,947
    Thanks
    8,348
    Thanks Received
    6,860

    Default Re: Help identify and what is it worth?

    Quote Originally Posted by alancurry View Post
    Thanks everyone for the replies. I've posted the Craigslist ad here: http://www.pachitalk.com/forums/crai...tml#post448547

    Alan
    $250 for both seems a tad high. I'd buy them at about $100 for both. But I'm not very knowledgeable on the value of early moderns. All I'm saying is try not to spend more than $50 on the SSC if you want it.

    100 machines and counting...

  14. The following 2 users say "Thanks" to mxfaiman


Similar Threads

  1. Help identify this machine and is it worth it?
    By alancurry in forum Vintage Pachinko
    Replies: 14
    Last Post: 04-20-2012, 12:46 PM
  2. What is this worth?
    By ironworkerdalton in forum Vintage Pachinko
    Replies: 5
    Last Post: 06-03-2010, 07:48 PM
  3. What are they? And what are they worth?
    By cardwwi in forum Vintage Pachinko
    Replies: 5
    Last Post: 03-20-2010, 11:18 PM
  4. What are these worth?
    By Rising Sun in forum Vintage Pachinko
    Replies: 4
    Last Post: 01-24-2010, 08:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •