Nishijin C How to remove the lock cover so I can remove the frame?

[Thraka]

I don't know how to remove this without lots of force. What do you normally do and is it easy to put back together? Any other warnings? There is a pin on the top and the bottom.

lockcover.jpg

[Moparformances]

take it out from the back

[Thraka]

the plastic feels like it's resting on the frome with those tiny pins holding it in. It's pretty think and I do not see anything coming out of the back.

[Moparformances]

there sould be screws to take the whole lock assembley out.. screw near the top middle and bottom..

open the playfield from the frame and taht will give you better acces to the little philips head screws

all your access to the lock is from the back

then you can take the whole lock assemble to the smith
______________________________________________________
the piece you have circled in your pic is just decoratino.. theres nothing under it

[Thraka]

Thanks for the suggestion. I ended up using a flat head screwdriver to lift the plastic ever so slightly on both ends and force the pin up away from the plastic. Then I could use pliars to pull the pin out.