Azteca the legend returns

[unclephil123]

Tried this y'day i dont see any where so i will try again...new guy here so be gentle...purchased the azteca machine...takes coins sometimes mostly not...when it does take coins...the reels will spin..the three lites come on...but can only stop the reel on the right...the last two spin and time out then stop...replaced the coin receiver thingy (m6) with one from another machine that works...still have the same problem...dont know if it is common to one board or does it sound like multiple troubles...if i am making any sense let me know...all help greatly appreciated...

[luckydog]

your buttons need cleaning or you have a poor contact on the button connector wires

[Frank A]

Check all of your connections. In transit the cables come loose. Disconnect and push back in on all of the ribbon cables, connectors etc. Check the board on the upper right side and make sure everything is tight.

[unclephil123]

Removed and replaced all ribbon cables and all other cables that i could reach...checked board in upper right of cab...all seems tight...how would i clean the buttons, do i have to remove the ckt bd that they are on??? These things are also happening.

1. When i put in the coins it register on the counter...but wont start the spin unless i turn off the machine and turn it back on.

2. When the reels are spinning i can stop the right hand side only, and that button puts out all three lights.

3. If i move the start knob up and down it will make the lights go on and off.

4. One coin, two coin, max bet all turn the red lights on and off.

5. If i get a replay i cannot play it unless i turn machine on and off.

[luckydog]

i hope your using tokens!!!

i still say its poor connections somewhere or pinched wires

[unclephil123]

Tokens...ive been using those little round silver thingies... I think it might be the ckt board that everything having trouble seems to be connected to...You may very well be right ...Ive checked the wiring all the way down to the connectors...I am new at this and i will do what ever i am told to do...I really like this Pach and I hope to get it working...I also have the old Azteca and it is nothing compared to this puppy... Thanks Pat Cheeslowe

[luckydog]

keep trying

i bought a pachislo that was running wacky,

i treid a different motherboard with no luck,

but, when i put the orginal board back in and hooked up wiring again, it worked

[hanabi]

Whilst searching for something else in the Research Centre I found a link to the little Japanese guides books for 'Azteca The legend Returns' and thought I'd just add the info / link to this thread

The link shows both versions of the little book, for 'Type A' and 'Type B' machines, just scroll through the pics

PachiTalk Research Center - DaStooge's Play Guides - Azteca the Legend Returns - PachiTalk