JAWS Pachinko

[Tazman]

Ok I put a tranformer on the new frame.
Oh yes it is so fun when you turn it on and the blood oozing from your ears. lolol

Pic 1 - Red Light at top left mean ?
Pic 2 - 1-4 LED Light solid, 5 blinking (LEDs lower center)
Pic 3 - 1-4 LED Lights solid (LEDs left lower of center)
Pic 4 - Upper hopper ramp open
Pic 5 - Orange Switch toward back of frame
Pic 6 - 1st Button opens the door on the ball tray in front, 2-3 are card system, Game Select ??, Upper right button in pic ??
Pic 7 - Red Square light, and the 4 red lights ??
Pic 8 - LED Number ??

I must need a dongle for this since the Ball shooter doesn't work?

Is there a volumn switch and reset switch?

I want to play now...lol Help me so I can get this working.

Thanks to Monkeyboy and Slot-Pachinko (Robert). Like JAWS you have created a monster.

IMG_0076.jpgIMG_0079.jpgIMG_0080.jpgIMG_0081.jpgIMG_0082.jpgIMG_0083.jpgIMG_0084.jpgIMG_0085.jpg

[CarlW]

Have not seen that actual machine.

Upper left red light in picture one looks like a low reward tray light. Is the reward tray full of pachinko balls? If the pachinko balls all fall out, something needs to be re-positioned. Probably in picture four.

If you turn the handle, does the machine make a thumping noise? That is the shooter but it is empty. If it does not make a noise, you need a dongle. You do need a dongle regardless, but I didn't see the port in your pictures. The port looks like a parallel port on a computer. Do you need a picture of what a dongle looks like?

[monkeyboy]

Ditto above. Pull the dongle from your Gladiator and you will be good to go. I'm glad the cell arrived in good working order.

[Jon]

I have just looked at my own Jaws and it must be the dongle as stated above I took mine out and the shooter won't work Here are some pictures and a video link to follow once uploaded
DSCN1000.jpgDSCN1001.jpgDSCN1002.jpg

[rubberratt]

You will definitely need a dongle to get the shooter to work. You should also perform a reset on the payout mech, and the machine itself. just to clear any old stuff still hanging round from the last time it was played. If is was powered off for a while, then it will probably reset itself.

[new in town]

Congrats on getting it up and Running.

Please PM me your E Mail address and Home Address and I will send you a Dongle.

COST ? ? ?

Spoiler

$0.00

[Jon]

In your Picture no. 5 the Orange switch will release any balls in the ball tray at the top to any that are in the hopper WARNING... make sure you have a pot for under the machine unless you enjoy finding all the balls that fall out also here is that video link to show what happens when the machine doesn't have a dongle in it and when it does http://youtu.be/31zuFbGwE90

[Tazman]

I don't have a dongle on my Gladiator to pull.

In Pic 4 switch up or down?
In Pic 5 which way should I have the orange switch ( to the front or back ).

Can you answer all the questions I had above that weren't answered in my initial thread?

I dropped a few balls into the Start pocket and actually go 000 match and then the 777 so it was going nuts and I know what the CHANGE button does.

After that the LED lights on the back #1,2,5 Blinking and 3-4 Solid.

Pic 6 - 45 was lite up. ??
Pic 7 - H was lite up. ??
Pic 8 - 15 was lite up. ??

Looks like I need a front reward tray or something since when I press the left button in pic 6 all the balls fall out the front from the ball shooter tray.

[Jon]

Picture 4 i have never moved mine but looks like its to shut of the balls in the tray so just leave that if the balls go through it then its fine if not move it which ever way lets the balls flow through!

Picture 5 I think the orange switch go's the the left I beleive if the put a couple of balls in the top and if they go through to the it the ball hopper then that is fine if they fall straigh out the bottom of the machine then move that orange switch the other way (the orange switch is used to empty the hopper of any balls in there, so if you wanted them out thats what you use!

I beleive everything else will go away once you have a dongle in it apart from L.E.D 1 keeps blinking I think which might be to do with the door being open!

and the final part you said "when you press the left button on the machine" that is to empty your winning balls out into a pot (so for example when these are played in japan if you win loads of balls you will need to empty those balls into a pot as the machine won't have enough room in the front to store them just helps make everything easyer)

[Tazman]

I think the dongle is going to be too long. Can I use a standard D25 M/F cable to connect the dongle too and then to the pachinko?

[monkeyboy]

I don't see why that wouldn't work.

[naha13]

as long as it is a straight though DB 25 cable it should work fine

[mbodi]

If you don't have the right cable, you could loosen the screws on the connector and slide the dongle in on an angle, until you get the right one.

[Moparformances]

DaveRob sells and extension cable if ya need one...

[Tazman]

Yes but I could get one alot faster at Best Buy or alike. I might still have one if not I'll get one from him I just got the dongle today I ordered last week,

[Tazman]

Everything works good now.

What is the upper ball hopper for if you set the orange switch ( pic 5 ) so that all the balls flow through to the bottom?

The front two card system buttons don't work. Must mean I need a Smart Card reader to attach to the dongle.

[mbodi]

The card reader buttons should work with the dongle.
Try pulling it out and then push it back in. Or try shutting the machine off and then back on again.