Universal Solex F8T5 CW Starter driver Board or Ballast issue..

[pinslotguy]

I have (3) F8T5 bulbs that are driven by a ballast and a board ?

The board is marked 63FL-3. I have found the board is the problem by process of elimination with the other (2) boards / ballast combos.

I have removed the diodes and found some of them to be bad. The marking on them however do not cross reference to anything current. They are marked as Follows:

KIVUB30 the 3 and 0 have a line over them

KIVUA36 the 3 and 6 have a line over them

V634.

V637.

If someone has this board or schematic or knows these part numbers and can let me know what Diodes to use or has the board for sale it would be helpful. I have a part request into Stealth currently. I'd love to be able to repair this one though.

Or any recomendations on how to drive the F8T5 CW bulb other wise that i can only do slight modifications to the wiring available.

Thanks



IMG_3032.JPGIMG_3033.JPGIMG_3034.JPGIMG_3035.JPGIMG_3036.JPGIMG_3037.JPGIMG_3038.JPG

[pinslotguy]

I could not find the exact part or the values of the diodes. I have found an alternate solution that worked well. It even fits the footprint of the old style fairly close. It is part number IG5 - 13ELS made by Inter-Global. Good alternative...