E1 Error that I cannot reset ?

[Riff Raff]

Hey all I am very new to this I purchased a slot machine and it has an E1 error on it and I cannot get to reset. Please let me know what you need so that Someone can give me some help I will even give you my number so that we can do itreal time I would like to get it working soon so the kids can use it. They are itching to use it since i got it lol Thanks for taking the time to read this .

[Steve Cebu]

Welcome to PachiTalk!

Did you try a proper reset first?
Where you open the machine
Put the small reset key in the lock
Turn off the switch next to the key then turn the reset key
Then turn on the switch and set your odds level
Then turn the reset key back to it's starting position?

[Moparformances]

try a full reset

In order to change odds, machine must be in idle mode with no tokens or credits
being played. Locate internal toggle switch (red tipped or silver with on/off tabs)
or insert key into internal key switch (if your machine came with 2 keys).
Machine must be turned OFF. Turn key clockwise or flip reset toggle switch to
the "ON" or "ODDS" position. Turn main power switch ON to access
programming mode.

A number from 1 to 6 will be displayed on the CREDIT meter on the front door ortry a full reset


on a display inside the door. Locate the reset button. This will be located on
your power supply. On SAMMY brand models, the button is on the inside of the
door only.
Depress the button and notice movement of number being displayed on the
credit meter. Once the desired level is displayed (1 to 6) pull "spin reels" handle
(black or red knob on front door) down, like you are going to spin the reels, to
lock odds level into machine memory. Turn key switch back or flip toggle to
"OFF" or "PLAY" position. Machine should immediately initialize. You will know
the machine initialized if the "Insert Medal" light starts flashing. If not, make sure
you remembered to press down the "SPIN REELS" lever.
If it still doesn't initialize, turn power to the OFF position, wait 15 seconds andturn power switch back to ON position



Welcome to Pachitalk

[hanabi]

I found a great video the other day that shows you how to clear the E1 error, it explains much easier then it would be for me to write it out

http://www.youtube.com/watch?v=zzs-_NBtguo

Let us know how you get on, and

Welcome to PachiTalk!!

[Riff Raff]

Thanks to all that answered my post The video was absolutely what made the difference Your awesome guys thanks alot !