marine carnival

[Jimm]

I have a Marine Carnival which I have had for several years> It worked great but I put it away (in storage ) for awhile now I am trying to play it again everything seems to light up but when I try the spin knob nothing happens. Can anyone help ?

[Moparformances]

im guessing its a Pachislo...

Pics would be a great help..

can ya confirm its a pachinko or is it a Pachislo??

and of course

Welcome to Pachitalk

[yose]

Welcome to pachitalk After sitting for a while it probably needs a full reset .

[Chrisdice]

Yes, Marine Carnival is a pachislo and its one of two things. A. it needs a full reset after being shut off for a while or B. you have a stuck or dirty button / spin knob. Try the reset first.

[Moparformances]

Just in case hear is a how to reset

In order to change odds, machine must be in idle mode with no tokens or credits being played. Locate internal toggle switch (red tipped or silver with on/off tabs) or insert key into internal key switch (if your machine came with 2 keys). Machine must be turned OFF. Turn key clockwise or flip reset toggle switch to the "ON" or "ODDS" position. Turn main power switch ON to access programming mode. A number from 1 to 6 will be displayed on the CREDIT meter on the front door or on a display inside the door. Locate the reset button. This will be located on your power supply. On SAMMY brand models, the button is on the inside of the door only. Depress the button and notice movement of number being displayed on the credit meter. Once the desired level is displayed (1 to 6) pull "spin reels" handle (black or red knob on front door) down, like you are going to spin the reels, to lock odds level into machine memory. Turn key switch back or flip toggle to "OFF" or "PLAY" position. Machine should immediately initialize. You will know the machine initialized if the "Insert Medal" light starts flashing. If not, make sure you remembered to press down the "SPIN REELS" lever. If it still doesn't initialize, turn power to the OFF position, wait 15 seconds and turn power switch back to ON position.

[Jimm]

I have done a complete reset which got rid of the E6 error code, but it still wont spin checked buttons nothing seems to be sticking

[Frank A]

Check all cables and wires. They shake loose in storage.

[yose]

If it was working before storage,and now it isn't some thing has come loose or dust is interfering with the connections . Blow out all the dust and check all connections.Clean all the sensors with glass cleaner and dry good.