hi guys im new here and i need help for a bellco automatic

[adrian12]

Already tried that its so puzzling as no lights or any thing but has full power

[yose]

Retrace what you did before.If the machine was working before you cut the wires then you had to put something back together wrong somewhere.It has to be a main power lead that is loose out of the power supply,or connected to a wrong terminal. To not have lights shows no power,because the belly glass lamp does'nt effect the gameplay,or any of the other fluorescent lamps.

[adrian12]

Already have mate the reels have 18v running through all 3 its just weird all wires are connected in the right places there's 20 v going to the belly light but not powering up the light is ok too as I checked in my fish tank on the light strip it seems somethin is shorting the machine so nothing is working but has power if u know what I mean I'm an electricians mate so I know a bit about what I'm doing but I just carnt get my head around why its not working

[yose]

When you jumped the reel sensors it may have overloaded the reel curcuit board and shorted it out, or blew a micro fuse or chip so it can't boot up?. It has me puzzled.Maybe the mother board isn't getting power, I don't know how to check that.Maybe the reel sensor is shorted out. Anything that is shorted will stop the complete curcuit.This has me stumped.