ahhh and it begins 1 down 29 to go

[Ikaria]

If you find you have an extra control board for a Sankyo hanemono I'd be interested. Might be needing one for a Nishijin Y&O as well.

[discgolfer72]

shoot me a pic of exactly what you need and ill see if i have one to spare

[Ikaria]

Here's the troubleshooting thread from a while ago that has the photos. => http://www.pachitalk.com/forums/pach...eshooting.html

Oops. Not a Sankyo after all.

[discgolfer72]

i do have a computer for that style machine but it looks like the older design because it has less connectors

[alphaminor]

Once the dust settles, can you see if you have a leftover shooter motor like this one?

shooter motor 1.jpg

its from this machine
BinBin variety 2 cab.jpg

and once again gratz on your find!!! truly amazing!

[discgolfer72]

sent you a pm let me know

well started today listing parts machines on ebay what a task lol

[Ikaria]

If your have an Omron switch (TL-PP93), I could definitely use one for a center start switch on a Nishijin. Picture in this thread (post #8) in case the pic doesn't show. http://www.pachitalk.com/forums/mode...out-crowd.html

Thanks!

IMG_0025a.JPG

[discgolfer72]

im shure one of the machines has one let me check the ones not on ebay and see

[discgolfer72]

ikaira got busy with stuff and have not had a chance to check on thoes sensors will be tearing down all the onws left and parting them out so if you need the sensor still let me know

just got another one going

had to swap the entire back plastic from another machine since this one had totaly shatterd plastic but now it works

1 ?

how does the glass attach to these and is it a special shape id if so can they be purchased somewhere

[Ikaria]

Yes, please. Still need the switch. If you find one, shoot me a pm with how much, and I'll get back to you.

Picture of the N*Asuka glass.

zIMG_0264.jpg

[discgolfer72]

will do

crap i thought so im missing the entire ring that holds the glass in on all 4 of the frames i have for that type of machine

does the glass sit flush with the cell or flush with the front plastic could i just cut a round glass and hot glue it to the back side of the front or will balls still fall loose into the bottom


also can you give me a pic of what the wires from the front hook into

i see that the white green black wires hook to the ballast for the lights
i see 2 white wires for the door open switch and i found the wires for the speakers but there is 2 other wire groupes on mine that i cant find a mate for

[Ikaria]

The glass sits slightly off the cell. Looking at mine, what I would do is get some plexi, cut it to fit around the edge of the cell frame and use double adhesive weather stripping to hold it in place. Area marked in red.

For the wires, are you wanting to know where they attach in the door, or on the back?

[discgolfer72]

i found where the wires go i was digging thrue the other 3 frames i have to see if i had any of the light blue plastic parts that cover up the bulbs on the door
well i found one that still had the metal box that mounts below the ballast for the 2 door bulbs that has the volume controll

next ?

does the ballast run off of the main power to the machine of does it require a seprate power source(i notice there is another power style sonnector on that board that mounts under the ballast in the back)

[discgolfer72]

well it offical im done with the lot
here is what i ended up with after selling a few off








i can probaly fix 4 more machine from the lot but im done
i have the lot up on cl
i have alrady spoken to candyflip but he is to far away
anyone wants the rest make me an offer

20 or so machines
2 bug buckets of parts and cells

[hanabi]

wow wish those were over here

and that I had a bigger home

[discgolfer72]

thats my problem id hold on tho the lot for a bit longer and finish going thrue them
but i have a truckload of upright arcade games showing up in the next week or 2 and need the room badddddd if they are not taken in the next week ill have to tear a few more down to parts and the rest will have to go to the local goodwill

[candyflip]

I've contacted Alphaminor about these, as he is probably closest (at about 8+ hours drive away) but no response yet - he must be busy with something.

Hold on - I'm sure in the next day or so he'll re-appear.

[JACKSJE4]

I'm probably the next closest at 9.5 hours drive.

[Icemanabq]

Where are you located?

[discgolfer72]

overland park ks