Results 1 to 10 of 10

Thread: Need help w/ 1st machine. 2006 Sammy CR Sakigake Otoko Juku

  1. #1
    Tokie Owens Pachi-newb's Avatar
    Join Date
    Aug 2011
    Posts
    9
    Thanks
    6
    Thanks Received
    7

    Default Need help w/ 1st machine. 2006 Sammy CR Sakigake Otoko Juku

    Hi everyone.
    I'm new here and to Pachinko from Canada. I've owned 1 pachislo machine for years now and finally decided to buy a pachinko machine.
    I found this Sammy CR Sakigake Otoku Juku locally for $200 in amazing cosmetic condition and bought it today.
    It looks like a few wires are cut though. Everything plays fine, all pockets and reels work. The only thing I noticed is that the door open sensor and the hopper empty sensor seem to have been disabled or bypassed. There are 3 sets of 2-wire connectors on the rear of the machine labelled CN1(2 of them) and CN8 that have cut wires a few inches long. Not sure if these are for those circuits or where they connect if so. I can't see any other cut wires around.
    Any help/info about this machine would be great, a manual if anyone's got one would be amazing as well.
    Very new to this but a quick learner

  2. #2
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,435
    Thanks Received
    18,805

    Default Re: Need help w/ 1st machine. 2006 Sammy CR Sakigake Otoko Juku

    Welcome Aboard
    Maybe you can supply a picture. But by the sounds of it. It's the leads that used to go to the battle counter and parlour computers to monitor the machine. My Star wars had 6 cut off wires when I got it.
    Ian #UKPachinko

  3. #3
    Tokie Owens Pachi-newb's Avatar
    Join Date
    Aug 2011
    Posts
    9
    Thanks
    6
    Thanks Received
    7

    Default Re: Need help w/ 1st machine. 2006 Sammy CR Sakigake Otoko Juku

    I will take pics this evening and post them.Just to correct my first post, the connector labels are CN10, CN11,CN8

  4. #4
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: Need help w/ 1st machine. 2006 Sammy CR Sakigake Otoko Juku

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  5. The following user says "Thanks" to Moparformances


  6. #5
    Tokie Owens Pachi-newb's Avatar
    Join Date
    Aug 2011
    Posts
    9
    Thanks
    6
    Thanks Received
    7

    Default Re: Need help w/ 1st machine. 2006 Sammy CR Sakigake Otoko Juku

    Thanks for the welcome :-)

  7. The following user says "Thanks" to Pachi-newb


  8. #6
    Kungishi yose's Avatar
    Join Date
    Oct 2010
    Location
    roy utah
    Posts
    1,477
    Thanks
    3,485
    Thanks Received
    1,083

    Default Re: Need help w/ 1st machine. 2006 Sammy CR Sakigake Otoko Juku

    Welcome to pachitalk
    IMAGINATION IS MORE IMPORTANT THAN KNOWLEDGE

  9. The following user says "Thanks" to yose


  10. #7
    Tokie Owens Pachi-newb's Avatar
    Join Date
    Aug 2011
    Posts
    9
    Thanks
    6
    Thanks Received
    7

    Default Re: Need help w/ 1st machine. 2006 Sammy CR Sakigake Otoko Juku

    Here are some pics I took of the machine and boards on the rear. You can see the cut wires on the top right on the rear of the machine. I took a close up of that board as well.
    Attached Images Attached Images

  11. The following 4 users say "Thanks" to Pachi-newb


  12. #8
    Tokie Owens Pachi-newb's Avatar
    Join Date
    Aug 2011
    Posts
    9
    Thanks
    6
    Thanks Received
    7

    Default Re: Need help w/ 1st machine. 2006 Sammy CR Sakigake Otoko Juku

    I was also wondering what those arrow buttons and start button on the bottom left do if anyone knows.Thanks

  13. #9
    Ensign Newton owennewton's Avatar
    Join Date
    Mar 2007
    Location
    McMinnville, Oregon, United States
    Posts
    4,830
    Thanks
    32,278
    Thanks Received
    5,244

    Default Re: Need help w/ 1st machine. 2006 Sammy CR Sakigake Otoko Juku

    the wires at the top on the back went to a battle counter or the parlor monitoring system so they are nothing to worry about. I don't have any experience with that frame so I am not sure what those buttons are for
    the

    LLTR

  14. The following 2 users say "Thanks" to owennewton


  15. #10
    Tokie Owens Pachi-newb's Avatar
    Join Date
    Aug 2011
    Posts
    9
    Thanks
    6
    Thanks Received
    7

    Default Re: Need help w/ 1st machine. 2006 Sammy CR Sakigake Otoko Juku

    Just got Pinball Dave's dongle 2.0 and smartcard reader. I now have a light that flashes letting me know hopper is empty. Would still be curious as to why the shooter knob does not disable as I've heard it should.
    Thank you Pinball for a great product!

  16. The following user says "Thanks" to Pachi-newb


Similar Threads

  1. Heiwa 2006 Pachinko machine! - $120 Northridge
    By JACKSJE4 in forum FB Marketplace, Craig's List and Other Listings
    Replies: 2
    Last Post: 04-30-2011, 11:08 AM
  2. 2006 CR Pachinko Tanukichi-kun machine by Kyoraku
    By candyflip in forum Yahoo Japan - Auction Area
    Replies: 0
    Last Post: 11-18-2010, 07:55 PM
  3. A must have Sammy Machine!
    By Eddie in forum These are the days of our lives...
    Replies: 3
    Last Post: 12-03-2007, 01:59 AM
  4. Think I found the 'Must Have' machine of 2006!
    By compirate in forum Model Talk
    Replies: 41
    Last Post: 02-21-2006, 07:03 PM
  5. Need help with a sammy machine
    By pagan3212 in forum Model Talk
    Replies: 5
    Last Post: 12-30-2004, 04:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •