USA W-Lifter Pics Coming Soon! Full USA Worm Lifter DIY Write-up

[WondersPachi]

Hey There Fellow Members!

Pictures Below!

I just wanted to let everyone know that I am nearing completion on my worm lifter.

I've found the right gears, same motor as Mr. D. appropriate bearings and the same bracket

though its mounts are slightly different but a middle cut allows you to space the motor in smaller

amounts by spinning the motor unit and only using one bolt. It even wedges itself against the middle cut.




Also like I said before, I'll be providing a very detailed write-up on my methods and what I

used so that anyone over here in the States can build one if they really want to. I will be taking

this model to another level and hope to eventually provide them at a very reasonable price. (Not MDF units though)

Shipping won't be a problem, some assembly would be required but it could easily be simplified.

Here are some pictures (one my girlfriend was kind enough to model it ) of the completed lift

unit. I only mounted the motor to the top because I just wanted to see it run, I plan to move it

below later. Both gears together cost about 20 bucks Larger had to be bored out.


Thanks for readin! Keep an eye out for the write-up !



Lifter Upper Top-Drive Test Method Shot 3.jpgCierra Dea and Lifter.jpgLifter Upper Top-Drive Test Method Shot 1.jpgLifter Upper Top-Drive Test Method Shot 2.jpg