2nd & 3rd Nishijin

[knedvecki]

Well, I am hooked. I just picked up my 2nd and 3rd Pachinko machines. I could use some help identifying them. The first one is a Shiroi Kamome and the second one is a Circuit which I got for free, because they guy said it had a broken wire that needed to be soldered at the ball feed stop. To me it looks like there is a plastic support that is missing and there is a lamp cord type of wire that is cut off that goes to an electric circuit board inside that I do not know the power rating of. Any help would be appreciated. Keith
IMG_1728.jpgIMG_1730.jpgIMG_1729.jpgIMG_1731.jpg

[knedvecki]

Okay, so call me lazy, I actually did not have time to check, and then some neurons collided and I remembered that Mopar's How to Power a Power Flash / Circuit Racer. And there is the back side of Circuit Racer. I still need to do some checking on the Shiroi Kamome Cappa machine. I need to check out components. And I was going to replace / fabricate a new wire from some music wire available at Ace hardware for the ball stop, but that is not needed. Just need to fab up a decent clear plastic support. I think that I have some clear acrylic like Lexan in the shop.

[Moparformances]

nice pair for Model "B" machines...

looks like ya answered your own questions.. but if ya need a hans with circuit racer fee free to ask

[knedvecki]

CenterFeature.jpg

Mopar, Do you know what the Shiroi Kamome Cappa machine is called or anything about it? Here is the center feature. Thanks, Keith

[Moparformances]

Mopar, Do you know what the Shiroi Kamome Cappa machine is called or anything about it? Here is the center feature. Thanks, Keith

sorry no

most vintage machines dont have Proper names... we give them name based on style of the center feature..

hard to see in the small pic but i would just call it "Cappa"

[knedvecki]

Thanks.

[mxfaiman]

Hey Keith or Mopar,

can you post a large close up picture of the decal under the tire on the circut racer machine also pictures on the upper switches the decals on mine are fading / peeling off.

[Moparformances]

Hey Keith or Mopar,

can you post a large close up picture of the decal under the tire on the circut racer machine also pictures on the upper switches the decals on mine are fading / peeling off.

Shoot Member john-q an e-mail.. his machine is in really nice shape... my sticker is peeling and not in the best of shape

[mxfaiman]

he has another one???

[knedvecki]

These pix are from my cell phone. The good camera is at my daughter's house. I can try again tomorrow, if you think these will work for you with the good camera in jpeg or pdf Hi Res. Keith

[mxfaiman]

They are kinda fuzzy. But I'm in no rush at the moment to get them.

[knedvecki]

I see what I can do tomorrow night after work.

[Moparformances]

he has another one???

yes

[mxfaiman]

Did he just buy that or was it on his wall and I missed it.

[Moparformances]

hummmmm i think it was at my house when you were there...

[knedvecki]

I just took these without a tripod, ( I have one someplace). The first two are the ones over the left and right switches, and the third one is the center feature. I posted to my album for future reference. I hope this helps.

Keith

[mxfaiman]

thanks keith I think they will help a lot.

sorry don't mean to be picky but the last one is a little blury. Could you try to get another picture of it? I'm thinking about making these into the decals so I can stick them on my manchine.

[knedvecki]

I'll see if I can set up the tripod. Then it shouldn't be fuzzy at all.

[mxfaiman]

Okay so here is what it looks like after about 4 hours of work.

I did some customization to it to make it look better; though I will make it look like the original one and post it up here later. What I changed is mainly the yellow bar on the left should be white and there should be a small yellow bar under that one (see the original next to mine). Other than that I went and guessed what color was where and enhanced the colors overall.

[mxfaiman]

Here is the original style one.

Let me know if you can't view the files, I will try to post them in a different format.